Ntsc Analog On-Screen Menu Features; First Time Setup - Philips 64PH9905 Instructions For Use Manual

MAIN MENU
PICTURE SOUND
FEATURES
1ST TIME SETUP EXIT

FIRST TIME SETUP

F irst Time Setup automatically takes
care of some basic control feature
settings for you. Follow the steps in this
section to quickly add area channel
numbers into the DPTV's scan system
memory, and set the DPTV for your
connected signal (Antenna or Cable.)
You can also set-up your TV Smart
Clock feature for the first time as well.
BEGIN
1
Press the MENU (or ok) button
on the Pronto remote or DPTV. An
on-screen list of NTSC features
shows on the "MAIN MENU".
2
Select "1ST TIME SETUP" on
the DPTV's Main Menu. (Selected
MENU item is highlighted in RED.)
Press the remote's Menu
buttons to move UP/DOWN and
from SIDE-TO-SIDE within the list
of on-screen features.
Press CH(annel)
VOLume (+) (-) on the DPTV's
local keyboard to move UP/DOWN
and from SIDE-TO-SIDE within
the list of on-screen features.
3
Press MENU (or ok) button on
the remote or DPTV to begin
SETUP.
Follow the instructions shown on
the screen to guide you through the
First Time Setup and use of your
new DPTV.
STOP
S H
MART ELP
Note: The Smart Clock
option "SET TIME
AUTOMATICALLY" sets the
DPTV's clock according to TV
station Data Services Information
(where available). With this mode
the clock will automatically reset
itself after power outages and
update itself for Daylight Savings
Time changes. The Smart Clock
feature will also reset itself every
time the TV is turned off.
The "SET TIME MANUALLY"
option allows you to only enter
the current time of day and AM or
PM settings.
NTSC/A
NALOG
NTSC NTSC
The First-Time Setup
provides a simple method
of adjusting the most
important controls for
this television receiver.
Press "M" To Continue
and
Please check that your
OR
analog TV antenna or cable is
connected to the plug
the TV rear input panel.
Press STATUS to Quit
Press "M" to Continue
The search for active
channels is complete
for the analog TV antenna.
17 channels were found
and saved in memory
Press "M" to Continue
Press "
time zone that you live in.
Press "M" to Continue
O - M
N SCREEN
ANALOG MAIN MENU
PICTURE SOUND
2
FEATURES
1ST TIME SETUP EXIT
CH UP
SOURCE – VOL M + VOL EXIT
CH
DOWN
Many of the current TV
control settings will be
modified by continuing
with First-Time Setup.
Press STATUS to Quit
Press "M" to Continue
marked ANT on
System is testing for
correct tuning mode
for the analog TV antenna.
or
This TV contains a clock
which can automatically
be set through the
SMART CLOCK feature.
.
The clock will be set
to the time broadcast
by certain TV stations.
Press "M" to Continue
" to select the
ATLANTIC
Daylight Savings Time?
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
Press "
Press "M" to Continue
6
F
ENU EATURES
Press the Pronto remote's
"analog format" (or the
"Source" button on the
3
DPTV keyboard) to select the
NTSC operating mode.
This TV is equipped with
the Smart Clock feature.
This feature is designed
to operate only on the
analog TV antenna.
or
Press "M" to Continue
* Please Wait *
System is searching for
for the analog TV antenna.
1
Do you want to set the
clock automatically?
SET TIME AUTOMATICALLY
SET TIME MANUALLY
Press "
Press "M" to Continue
See following page for details on "Set Time Manually"
Do you observe
The time is broadcast by
certain TV stations
YES
We suggest trying PBS first
NO
" to Select
Press "M" to Continue
Continued on Next Page
1
DTV
menu
ok
exit
2
3/3 Analog DTV
* Please Wait *
all active channels
Testing channel 2
in cable mode.
" to Select
Enter the channel
X