Philips 64PH9905 Instructions For Use Manual page 37

ATSC/D
RED/BLUE CONVERGENCE
C onvergence is the correct
lining up of the red and blue
light paths on the DPTV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are
necessary.
BEGIN
1
Select the ATSC Convergence
control.
With Picture Menu on-screen,
move the highlight with the
MENU buttons. Then press
the MENU (or ok) button.
2
Press the MENU
to select either the Align Red or
Align Blue Convergence control,
press the MENU button to
continue.
3
Press the MENU
to move the selected red (or blue)
convergence cross directly over the
white cross on the DPTV screen.
The red (or blue) cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
4
Press the "exit" button to clear
the screen when convergence
adjustments are complete.
STOP
S H
MART ELP
Remember, Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
P
IGITAL ICTURE
ATSC ATSC
buttons
2
1
buttons
menu
exit
3/3 Analog
4
NOTE: Adjustments for "Multi-Point" on-
screen color fringing can also be made as part
of the DPTV's Convergence control system.
Follow the on screen menu directions to
select individual screen areas that can be
readjusted and set for varying red/blue color
fringing conditions. These multi-point
settings can then be "Saved" to memory for
the specific areas of the DPTV screen (or
Factory Settings for convergence can be
recalled and put back into place for use).
M C
ENU ONTROLS
DTV Main Menu
Picture
Sound
Speakers
Features
Tuning Program
DTV Setup
Exit
mute
channel
DTV + +
volume
+ +
ok
DTV
1
2
3
CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
BACK
37
Picture Menu
Color
Brightness
Sharpness
Picture
Tint
Convergence
Back
CONVERGENCE MENU
ALIGN RED
ALIGN BLUE
CONVERGE MULTI POINT
BACK
PRESS to ALIGN RED
Press MENU to Return
MULTI-POINT CONVERGENCE CONTROLS
CONVERGE RED POINTS
USE TO ADJUST
DIGIT 2, 4, 6, 8 TO MOVE CURSOR
MENU TO RETURN
PRESS MENU NOW TO CONTINUE
DTV Main Menu
Picture
Sound
Speakers
Features
DTV Setup
Exit