Saving And Restoring Camera Settings; Camera Configuration Selection Dialog - Linea Link HS User Manual

Saving and Restoring Camera Settings

The parameters used to select, load and save user sets are grouped together under the Camera
Information category. There are 8 user sets available and 1 factory set.

Camera Configuration Selection Dialog

CamExpert provides a dialog box which combines the features to select the camera power-up state
and for the user to save or load a camera state from the camera's memory.
Camera Power-up Configuration
Either the Factory or one of the User Settings can be used as the default setting and is the set
loaded when the camera is reset of powered up.
The first drop list selects the camera configuration state to load on power-up (see feature
UserSetDefaultSelector). The user chooses from one factory data set or one of 8 possible user
saved states.
User Set Configuration Management
The user setting is the saved set of camera configurations that you can customize, resave, and
restore. By default the user settings are shipped with the same settings as the factory set.
The second drop list allows the user to change the camera configuration any time after a power-up
(see feature UserSetSelector). To reset the camera to the factory configuration, select Factory
Setting and click Load. To save a current camera configuration, select from User Set 1 through
User Set 8, and click Save. Select a saved user set and click Load to restore a saved configuration.
Active Settings for Current Operation
The active setting for the current operation is the set of configurations that are active while the
camera is currently running, including all unsaved changes you have made to the settings before
saving them.
These active settings are stored in the camera's volatile memory and will be lost and cannot be
restored if the camera resets, is powered down, or loses power.
To save these settings for reuse the next time you power up or reset the camera, or to protect
against losing them in the case of power loss, you must save the current settings. Once saved, the
current settings become the selected User Set.
Linea CLHS Series Camera Camera Operation 39
•