Table of Contents
Advertisement
Camera Operation
CamExpert for Linea CLHS Cameras
The Sapera CamExpert tool is the interfacing tool for GenCP compliant Camera Link cameras, and
is supported by the Sapera library and hardware. When used with a camera, CamExpert allows a
user to test most of the operating modes. Additionally CamExpert saves the camera's user settings
configuration to the camera or saves multiple configurations as individual camera parameter files
on the host system (*.ccf).
An important component of CamExpert is its live acquisition display window which allows
immediate verification of timing or control parameters without the need to run a separate
acquisition program.
Click on any parameter and a short description is displayed below the Category pane. The same
context sensitive help is available by clicking on the
configuration parameter. Click on the
information on CamExpert.
Note: The examples shown may not entirely reflect the features and parameters available from
the camera model and camera mode used in your application.
CamExpert Panes
The various areas of the CamExpert tool are described in the figure below. Device categories and
parameter features are displayed as per the device's XML description file. The number of
parameters shown is dependent on the View mode selected (Beginner, Expert, Guru – see
description below).
16
• Camera Operation
button then click on a camera
button to open the help file for more descriptive
Linea CLHS Series Camera
Advertisement
Table of Contents
