General - Sony RM-AV3000 Service Manual

Getting Started
Location and Function
of Controls
TV STB VCR DVD
qk
SYSTEM CONTROL
qj
1 2 3
qh
OK
MENU EXIT
qg
1 Clock Display key (page 8)
Displays the clock, the transmission
mark, the battery mark and the timer
mark.
2 Mode Display key (page 8, 13, 20, 30,
32, 40)
Displays the status of the selected
mode.
Function of the key changes according
to the selected mode.
3 LCD touch key display
The keys used for operating each
component and setting the
Commander are displayed.
Note
Do not press the touch keys using sharp
objects such as pins or ball-point pens.
6
SECTION 1

GENERAL

4 Label keys (page 8, 13, 20, 23, 30,
1
2
3
4
5 Component Select buttons (page 1 2)
5
6
CD AMP OTHER
6 OTHER button (page 13)
7
COMMANDER
TIMER LIGHT OFF
8
MORE
9
VOLUME CHANNEL
q;
qa
MUTING RECALL
qs
qd
7 TIMER button (page 68)
qf
8 LIGHT button (page 76)
9
q;
qa
qs
qd
32, 40, 79)
The selected modes (up to 8 characters
in each Label key) are displayed.
Labels change in the order from the
first stage to the third stage and come
back to the first, and so on, each time
you press the Mode Display key,
OTHER, MORE, or TIMER button
according to the selected mode.
Selects the component to control.
Label keys change in the order from
the first stage to the third stage and
come back to the first, and so on, each
time you press the OTHER button
when the selected component name is
displayed on the Label keys.
Used to set the timer program, and to
set the timer program on or off.
Used to light up the LCD display in
the dark. Press the button once to turn
on the light, and once again to turn it
off.
COMMANDER OFF button
Turns the power of the Commander
off. Then all the display contents are
turned off.
CHANNEL +/– buttons (page 88, 89,
90, 91)
Select the channel.
RECALL button (page 88)
VOLUME +/– buttons* (page 19, 29)
Adjust the volume.
MUTING button * (page 19, 31)
Mutes the audio. Press the button
once again to resume at the previous
volume.
RM-AV3000
This section is extracted
from instruction manual.
3