General - Sony RM-NX7000 Service Manual

• Location and function of controls
• Front panel
1
Touch panel display
Shows operation keys and various pieces of
information.
2
Direct Access buttons
Directly skips to the page that is programmed
for the button.
3
NEXT/BACK buttons
Change the page shown on the touch panel dis-
play. Press the NEXT button to display the next
page, or press the BACK button to display the
previous one.
4 OK button and Cursor Control buttons
Used to operate the menu display of a component
being controlled by the Remote Commander.
5 MENU button
Shows the menu display of a component being
controlled by the Remote Commander.
6 EXIT button
Exits the menu of a component being control-
led by the Remote Commander.
SECTION 1

GENERAL

1
2
BACK
INTEGRATED
3 REMOTE COMMANDER
OK
4
MENU EXIT
5
6
7
HOME
8
NEXT
COMMANDER
OFF
9
VOL CH
0
MUTING RECALL
qa
qs
qd
7 Memory Stick slot
Used to insert a "Memory Stick."
8 HOME button
Returns to the first page of the Home display.
9 COMMANDER OFF button
Turns off the indication of the touch panel
display.
If this button is pressed while a macro is
executed, the macro procedure stops.
0 CH +/– buttons
Select a channel.
qa RECALL button
The function of this button varies depend-
ing on the component being controlled by
the Remote Commander.
qs VOL +/– buttons
Adjust the volume.
qd MUTING button
Mutes the audio of a component being con-
trolled by the Remote Commander. Press
the button once again to resume at the pre-
vious volume.
RM-NX7000
This section is extracted
from instruction manual.
3