General - Sony DSRM-20 Operating Instructions Manual

English
Contents

General

General ............................................................................ 13
Parts Identification ......................................................... 14
Connection ..................................................................... 15
Operation ........................................................................ 16
Jog/Shuttle Search ............................................................ 16
Searching Using the Index Function ................................. 17
Displaying Tape Information ............................................. 20
Specifications .................................................................. 21
The DSRM-20 Remote Control Unit is designed to control the DSR-40/
40P. When used with the DSR-40/40P, the DSRM-20 adds the following
functions.
Jog/shuttle search
With the shuttle dial, the playback image can be viewed at -14 to +14 (for
DSR-40) or -17 to +17 (for DSR-40P) times normal speed as well as in
still mode. With the jog dial, the playback image can be viewed at -2 to +2
times normal speed as well as in still mode.
Index search
You can quickly find desired points using index signals or date and photo
mode information. The index signals are recorded on the tape and the date
and photo mode information is recorded in the cassette memory (if it is
equipped with the tape).
Tape information display
You can display information about the camcorder during playback if the
tape was used for shooting on the DSR-200/200A/PD1/PD100 (or DSR-
200P/200AP/PD1P/PD100P) camcorder.
GB
13