Horn Alert; Operator Selectable Tone; Public Addresss; Aux - Kenwood TK-760G Instruction Manual

HORN ALERT

When a call is received that has correct DTMF codes or 2-tone signalling, Horn
Alert causes the vehicle horn or some other external alert to sound. This
function notifies you of a received call when you are out of the vehicle.
1 To activate the Horn Alert, press the function key programmed as Horn Alert.
2 To disable the Horn Alert, press a Horn Alert function key again to return to
the normal operation.

OPERATOR SELECTABLE TONE

If this function is enabled by your dealer, you can change the default QT and
DQT tone frequencies. You can select 1 of 16 decode/ encode pairs, that is
preset by your dealer.
1 Use Channel Up and Down key to select the desired channel
2 Press a key, programmed as Operator Selectable Tone.
3 Use Channel Up and Down key to select a desired tone pair.
4 Press a key in step 2 again to return to the normal display.
PUBLIC ADDRESS
To use Public Address, the optional PA unit (KAP-1) and external speaker must
be installed by your dealer. This function amplifies audio input from the
microphone and outputs amplified audio from the external speaker.
1 Press the function button programmed by your dealer with this function
2 Press PTT and speak into the microphone.
Note: To adjust the audio output from the external speaker, please use Volume Up and Down keys to get
the appropriete sound.
3 To return to the normal operation, press the PA function key again.

AUX

A control port has been provided for an external board, such as a Voice
Scrambler. Pressing the function button programmed by your dealer, activates
or deactivates the AUX port.
12