Setting A Message Indication; Cancelling Messages - Samsung LCD 24B User Manual

DCS Gateway
• Dial the extension or trunk number, or dial 1 and then the
orbit number, on which the call has been parked.
You will be connected to the parked call.
If the parked call is not answered within a pre-programmed
period of time, it will recall your keyset and have a slow
flashing green light.

Setting a Message Indication

To leave a message at another station or station group if no-
one answers or you receive busy tone:
• Press the
MESSAGE
*41.
If you have no
select the MSG menu.
• When you receive confirmation tone, hang up.
(The message key on the called extension or on all of the ex-
tensions in the group will flash. Standard or SLT telephones
receive a special dial tone as a message indication.)

Cancelling Messages

To cancel a message indication that you left at another exten-
sion:
• Dial #43 plus the extension number at which you left a
message indication, or press the
the
CLEAR
To cancel all message indications left at your keyset:
• Dial #42 plus your extension. Your
will turn off.
key, or press the
MESSAGE
key.
— 37 —
TRSF
key assigned, use the soft keys to
MESSAGE
MESSAGE
Keyset User Guide
key and dial
key and then
key light