DCS Gateway
Transferring Calls
You may transfer a call to another extension in one of two
ways: a screened transfer allows you to notify the other party
who is calling, or you can do a blind (unscreened) transfer
without notification.
• While on a call, press the
or group number.
OR
Press a
DSS
matically put on transfer hold.
• Hang up when you hear ringing if this is an unscreened
transfer.
OR
Wait for the called party to answer, notify them of the call,
and hang up.
To return to the outside party without transferring:
• Press the TRSF key twice.
1. After the extension answers, you can toggle back and forth
between the parties by pressing the
pressing the RETURN soft key.
2. You can transfer an internal call by pressing a
3. When you are transferring a call to a keyset which is set for
Auto Answer, the transferred call may ring or be connected
without ringing depending on the system option set.
Transfer With Camp-On
When you are transferring a call to another extension and you
receive busy tone, you can camp the call on to the extension.
TRSF
key or station group key. Your call is auto-
— 17 —
Keyset User Guide
key and dial an extension
TRSF
DSS
key twice or
key.