VGA-In
The VGA-In port connects to mainly computers to broadcast video on the NovoTouch.
When connecting a device to the VGA-In port:
Use a standard VGA cable.
Select the corresponding VGA input in the input source menu on the NovoTouch. See
the Switching Input Source section for more information on selecting input sources.
If you want the NovoTouch to also broadcast audio from the connected devices,
connect an audio cable from the audio out jack of the source to the audio in jack of
the NovoTouch, as described in the Audio-In section below.
Audio-In
The Audio-In jack is used particularly for connections that feature video-only streams
(such as a VGA connection) by connecting to the audio out jack of the video source to
broadcast the audio from that source. When connecting a device to the Audio-In port:
Use a standard 3.5mm audio cable.
Copyright © 2017 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
NovoTouch User Manual
Page 21