Installing Batteries; Remote Control Usage - Vivitek NOVOTOUCH LK6530i User Manual

NovoTouch User Manual

Installing Batteries

Before using the display's remote control you must first install the two AAA batteries
included with the display.
1. Open the battery compartment cover on the remote control.
2. Insert the batteries ensuring that the + and - terminals on the battery match their
corresponding terminals in the battery compartment.
WARNING: Failure to install the correct batteries in the correct orientation may result in
damage or possibly injury.
3. Replace the battery compartment cover on the remote control.

Remote Control Usage

When using the remote control ensure that the remote control is pointed at the IR sensor
at the front of the display within a range of 8 meters distance and 30-degrees to the left
and right of the IR sensor.
Page 15
Copyright © 2017 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.