Vivitek NovoTouch LK6530i Quick Start Manual

Quick Start Guide
(For LK6530i, LK7530i and LK8630i models)
Display Overview (Front)
1 2 3 4 5 6 7 8 9
1 Magnetic Stylus Holder 6 Input Source / Settings Button
2 IR Sensor (for Remote Control) 7 Volume Down Button
3 Power Button / Status Indicator LED 8 Volume Up Button
4 Home Button 9 USB 3.0 Port
5 Back Button 10 USB 2.0 Ports x 2
Package Contents
Display
Wall Mount
Stylus x 3
Display Overview (Rear)
10
1 Right Handle
2 Windows OPS Slot
3 Wall Mount Screw Holes
4 Left Handle
5 Power Switch
VKA05 OPS Module
Remote Control Power Cable
(with Antenna)
VGA Cable USB Cable Audio Cable
Documentation CD Batteries Quick Start Guide
1 2 3 4
USB 2.0 AV IN COAX OUT RS232 AUDIO OUT LAN
5 6 7
6 Power Socket 11 HDMI Out Port
7 Speakers 12 USB 2.0 Port
8 Antenna Connector 13 HDMI In Port 1 (2.0)
9 Power Indicator LED 14 HDMI In Port 2 (1.4)
10 microSD Card Slot 15 Touch Port 1
Installing the OPS Module
1 Remove the 2 screws 2 Slide the OPS module into
securing the slot cover
the OPS slot.
onto the display, and then
remove the slot cover.
Ports and Connectors (Right)
With Android OPS Module Installed
8 9 10 11 12 13 14 15
RECOVERY USB3.0 Micro SD LAN
HDMI OUT USB 2.0 HDMI IN 1(2.0) HDMI IN 2(1.4) TOUCH 1
19 20 21
Ports and Connectors (Bottom)
25 26
USB 2.0 AV IN COAX OUT RS232 AUDIO OUT
27 28 29
16 DisplayPort In Port 21 LAN (RJ-45) Port
17 VGA In Port 22 HDMI In Port 3 (1.4)
18 USB 3.0 Port 23 Audio In Jack
19 Recovery Button 24 Touch Port 2
20 USB 3.0 Ports x 2 25 Coax Out Jack
3 Tighten the two captive
screws on the OPS
module until the module
is properly secure in the
display, and then install
the antenna.
16 17 18
HDMI IN 3(1.4) DP IN AUDIO IN VGA IN TOUCH 2 USB 3.0
22 23 24
LAN
30
26 Audio Out Jack
27 USB 2.0 Port
28 AV In Port
29 RS-232 Port
30 [DISABLED] LAN (RJ-45) Port