CellaVision DM1200 User Manual page 12

(Cont'd)
Place the system on a steady table. Do not place it where it is exposed to bumps or
vibrations, excessive temperature variations or direct sunlight. The system must be
connected to grounded electrical sockets only. Authorized personnel should do the
initial installation and reinstallation after moving the system. Do not install or run
any software not supplied with the system. To maintain electromagnetic
compatibility, use only original components. Spillage of fluid on the surfaces of the
system may cause malfunctions or deterioration. Wipe off spilled fluids
immediately with a soft tissue.
WARNING
The system should be serviced by authorized personnel only.
WARNING
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
The following symbols are found on the system:
Symbol
10°C
8
CellaVision
Explanation
Documentation needs to be consulted.
In vitro diagnostic medical device.
40°C
Temperature limitation.
This symbol is only valid in the European Community and
indicates separate disposal of waste of electrical and
electronic equipment.
Standby (Supply).
®
DM1200
User's Manual