Calling; Dialling With Number Keys; End Call; Set Volume - Siemens S55 Operating Instructions Manual

16
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Enter number (always
with area code, if neces-
sary with international di-
alling code).
§Clear§
the last digit, a long press
clears the entire phone
number.
A
Press the Call key. The dis-
played phone number is
dialled.

End call

B
Press End key briefly. The
call is ended. Press this
key even if the person on
the other end of the line
has hung up first.

Set volume

Ò Ó
Use the left side key to
change volume (only pos-
sible during a call).
If a car kit is used, its volume setting
will not affect the usual setting on
the phone.

Calling

A short press clears

Redialling

To redial the phone number last
called:
A
Press Call key twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
G
Select required phone
number from list, then
A
press ...
... to dial.
Note
Save phone number
(Phonebook.)................................page 23
º
Save phone number
(Addressbook)..............................page 26
§Options§ Call lists.......................page 31
...........................................page 18
§Hold
§; menu§ Call menu ...................page 20
§Divert§ Set divert ........................page 88
§Handsfr.§ Handsfree ..................page 18
Microphone off .............................page 20
Voice dialling ................................page 29
Auto key lock ................................page 88
Phone number transmission off/on
(Hide ID).......................................page 88
International dialling codes.........page 114
Phone number memo.................page 116
Control codes (DTMF)................page 112