Siemens VS 06 Instruction Manual page 32

Setting up
3
Figure
a) Push the flexible hose adapter into the air intake
opening on the vacuum cleaner lid until it engages.
b) To remove the flexible hose, press the two lugs
together and pull the tube out.
4*
Figure
Push the handle into the suction pipe/telescopic
tube.
To remove it, turn the handle slightly and pull it off
the tube.
5*
Figure
Insert the suction pipe/telescopic tube into the
adapter of the floor tool.
To remove it, turn the tube slightly and pull it out of
the floor tool.
6*
Figure
a) Connect the suction pipes together, or
b) Unlock the telescopic tube to adjust its length by
moving the sliding switch in the direction of the
arrow.
7
Figure
Holding the power cord by the plug, pull out the
required length and plug it into the mains socket.
8
Figure
Press the on/off button in the direction of the
arrow to switch your vacuum cleaner on/off.
Controlling the suction level
9
Figure
Set the suction level by turning the On/Off button in
the direction of the arrow.
The suction level can be infinitely adjusted to the level
required by turning the control knob in the direction
of the arrow.
Low power range
For vacuuming delicate materials, e.g. delicate
upholstery, curtains, etc.
Medium power range
For daily vacuuming of lightly soiled floors.
High power range
For vacuuming durable floor coverings, hard floors
and heavily soiled floors.
Vacuuming
10
Figure
Adjusting the floor tool:
Rugs and carpets
Hard floors
30
!
Please note:
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have (e.g.
rough, rustic tiles). You must therefore check the
underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp
edges that can damage delicate hard floors, such
as parquet or linoleum. The manufacturer does not
accept any responsibility for damage caused by
worn floor tools.
11
Figure
Remove the upholstery nozzle and crevice nozzle
from the accessories holder as illustrated.
Vacuuming with accessories
12
Figure
Attach the nozzles to the suction pipe or handle as
required:
a) Crevice nozzle for vacuuming crevices and corners,
etc.
b) Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
c) Furniture brush
For cleaning window frames, cabinets, mouldings,
etc.
d) Hard-floor brush
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
13
Figure
After use, push the crevice nozzle and upholstery
nozzle back into the accessories holder as indica-
ted.
Pet hair tool
14
Figure
Floor tool for easy and thorough vacuuming of pet
hair.
To clean the nozzle, simply vacuum it using the
suction pipe/telescopic tube
15
=>
Figure
You can use the parking aid on the side of the
vacuum cleaner if you wish to stop vacuuming for a
short time.
=>
Once you have switched off the vacuum cleaner,
slide the catch on the floor tool into the groove on
the side of the appliance.
=>
16
Figure
The appliance can also be carried using one of the
two handles when vacuuming steps, for example.
When the work is done
17
Figure
=>
Unplug the vacuum cleaner.
Tug the power cord briefly and let go. The cable
=>
then rewinds automatically.
*Dependent on model