Method Setup - Gc; Oven/Zones - DataApex Shimadzu GC-2014C Manual

Shimadzu GC-2014C

4.2 Method Setup - GC

4.2.1 Oven/Zones

Menu Path: Instrument -> Method -> GC Control
Oven Max
Sets the maximal allowed temperature for the column oven.
Possible values are:
Please note that the maximum value may differ for certain GC
models - listed values for it range between
Equilibry Time
Time that the GC needs to reach the temperature
equilibrium after the temperature program gets to the set
initial temperature. This time is used to distribute the heat
evenly in the oven.
Gradient Table
Sets the
time to hold this temperature
column will be calculated automatically. In other words, for
isothermal part of the temperature gradient, the temperature
set in
Fig. 7 Method Setup – GC – Oven/Zones
0 - 440.
Heat Rate, desired temperature
Final Temp will be kept for the interval set in
4 Using the control module
400
(Hold Time). The
7
and 470 °C.
(Final Temp) and
Total Time
Hold