After Use; Technical Data - Pyle PSTM50 User Manual

After use

PLEASE NOTE!
! Remove the plug from the mains socket before cleaning the device.
! Do not immerse the device in water and do not rinse it off under running
water.
! Allow the device to cool down completely before storing it.
! Store the device in a cool, dry location which is out of the reach of children
and animals.
1. Switch off the device, pull out the plug and allow the device to cool down completely
(approx. 5 minutes).
2. Remove the water tank from the device and empty it.
3. Carefully pull the collecting container out of the cleaning foot and empty the waste
into a rubbish bin. Then place the container back into the device.
4. Remove the floor cloth from the cleaning foot and wash it. You can wash the floor
cloths at a maximum of 140 F in the washing machine. Although they can be
tumble-dried, you should allow the floor cloths to dry naturally in the air so that
they last longer.
5. Over the course of time, hairs, threads and other particles accumulate on the
rotatable cleaning brush. We recommend that from time to time you remove any
contamination from the brush.
6. As required, wipe down the housing of the device with a soft, dry cloth.
7. Turn the upper hook of the cable reel so that it points upwards and wrap the mains
cable around the two hooks of the cable reel.
8. Let all of the parts of the device dry completely before you put it away.

Technical data

Model: PSTM50
Device: Pure Clean Steam Floor Mop & Sweeper
Voltage supply: 120, 60 Hz
Output: 1500 W
Capacity of the water tank: max. 28.15 oz.
Protection class: 2
o
8