Using The Built-In Toolbar - Epson BrightLink 695Wi Getting Started

3

Using the Built-in Toolbar

The projector's built-in toolbar lets you annotate images
from other devices that have been connected to the
projector, such as a document camera, tablet, or other
source. This is known as PC Free Annotation mode.
1
Press one of the source buttons on the remote
control to select the source for the image you want
to annotate.
Image from a
computer connected
to the Computer1 or
Computer2 port
Image from a computer with
an HDMI connection, or a
video player
2
To activate the toolbar, tap the board with the pen or
your finger. If you don't see the
icon and then tap the
Note: If you only see the
PC Free Annotation mode.
3
To close the toolbar, tap the
of the toolbar.
Image from an
external device
connected to the
USB port
Image from a computer or
tablet connected through a
wired or wireless network
icon, tap the
icon.
icon, you are already in
icon at the bottom
Two toolbars are available in PC Free Annotation mode,
one for annotation mode and one for whiteboard mode.
Many of the tools are the same as Easy Interactive Tools,
but fewer functions are available.
• Annotation mode displays the built-in toolbar on
whatever image is being projected.
• Whiteboard mode lets you project a white or black
screen or background pattern, and use the pen
or your finger to write or draw as you would on a
chalkboard or dry erase board.
Select annotation
mode
Undo
Select the
background pattern*
Choose custom
color and width
Erase—select small
or large dot for thin
or thick eraser
Hide or show toolbar
while drawing
Shows the current pen and
finger touch function
* In annotation mode, the select background tool does not appear.
Select whiteboard
mode
Redo
Use custom pen
Use highlighter
Use black, red, or blue
pen—select small or
large dot for thin or
thick line
Clear all drawing
Close toolbar