Roland VG-99 Workshop page 7

Enter the desired name for the Global Setting:
4
•
To select a character—
•
To change to a different character position—
buttons.
•
To insert or delete a character, or enter a blank space—
F1-F3 buttons.
•
To change the selected character's type—
•
To change the selected character's case—
When you're finished, press the EXIT button to return to the Play
5
screen.
Selecting a Global Setting
To select a Global Setting:
Press GLOBAL.
1
Use the PAGE buttons to navigate to Page 1 in the display.
2
Use the F1 knob or button to select the desired Global Setting.
3
Press EXIT to return to the Play screen.
4
Tip: Create a "Home" Global Setting
No matter what patch you're using at any given time, the
VG-99 is always affected by the parameters set in the currently
selected Global Setting. Because of this, we recommend that
you create a "home" Global Setting, one that you call up
when you're back in the environment where you practice and create VG-99
patches.
This is a good idea, because it creates a "benchmark" Global Setting that you
can always return to. How you set up this Global Setting is up to you, but a
suggestion would be to set all the parameters "flat"— that is, so they have
no effect on your VG-99 patches at all.
use the PATCH/VALUE dial.
use the PAGE
use the
use the F4 button.
use the F5 button.
You may find that you'll want to create more than one "home" Global
Setting—for example, one for working with headphones/studio monitors
and another for playing the VG-99 through an instrument amp.
To make a flat Global Setting, use the procedures described previously to
select an unused Global Setting and make the following adjustments:
•
MAIN OUTPUT SELECT—
•
Global Main EQ— Set all GAIN controls to 0 dB. (Alternately, you can
simply set MAIN EQ SW to OFF.)
•
Global SUB EQ— Set all GAIN controls to 0 dB. (Alternately, you can
simply set SUB EQ SW to OFF.)
•
NS— Select 0 dB.
•
Reverb— Select 100%.
•
SUB OUT Level— Select 100%.
When the VG-99 ships from the factory, all the Global Settings are set
as shown above.
After you've made these adjustments, give this Global Setting an appropriate
name, such as "Home" or "Flat Output. " And don't forget to call up this Global
Setting when you get back to your home environment after a gig!
The End
We hope you've found this workshop helpful. Keep an eye out for other
VG-99 Workshop booklets available for downloading at www.RolandUS.
com.
Select LINE/PHONES.
7