Keystone WT07 User Manual

Getting started
Congratulations on your purchase of this powerful WIFI Panic Knob. Once the magnet (smaller part with the handle) is moved away from
the reed switch (built into the larger part), the unit will send an alarm signal to your smart phone via your home/business WIFI connection.
Such signal is selectable as an Alarm Sound + Notification, Notification Sound + Notification or just a silent Notification. This product works
together with your smart phone and internet via WIFI. Please check that your smart phone is either an Android or IOS (iPhone) and that the
latest firmware has been installed. Please also check that your WIFI router is working properly and that its operating manual confirms that it
operates on 2.4 GHz with WPA/WPA2 encryption.
Installing the APP
1
install
1. Before powering up the Knob, please install our free 'NEXUSHOME ' APP onto your phone. The APP is available in an IOS version on the
Apple App Store and an Android version on the Google Play Store. Ensure your phone is connected to WIFI to complete account setup.
2. Once downloaded, click and open the APP. The following message will appear. Please click OK.
3. Now complete your User Profile by inputting your email address and a 6 digit or longer Password, click the REGISTER button, check your
email and click the link in the email from "Netify" to complete registration.
Setting up your DEVICE
1
connect WiFi
1. Go to the location in the Building where you eventually wish to install the Knob. Look at your smart phone and ensure you have a good
and steady WIFI connection there. Now, exit the APP, open SETTINGS on your smart phone and click "Wi-Fi". Check what is showing. If
you just have a main Router, it should be showing its reference name (or SSID). Each Router or Extender has its own unique reference
name or SSID. However, if you have a network with one or more extenders, it may also be showing, underneath, under "Choose a
Network", the SSID of an overlapping Extender, as in the picture 1 above. In this case, check whether you are closest to the main Router
or to an Extender and manually select, if necessary, the alternative closest/strongest SSID. THIS IS VERY IMPORTANT. The Knob will only
communicate Alarm signals to the WIFI Router or Extender that you are about to "pair" it to so it is essential that you pair it to the closest/
strongest Wi-Fi signal.
2. Re-Open the APP and click
"ADD DEVICE/WIFI SETTING".
3. Please select "Wireless" at the bottom right hand side of the Page.
WT07
WIFI PANIC KNOB
Product Specification
•
•
•
•
•
•
•
•
•
•
2
click OK
2
click "Add Device/WiFi Setting"
PROFILE at the bottom of the opening HOME page. This will take you to the APP's SETTINGS Page. Click
Built-in WIFI module that sends all alerts to your Smartphone
Super low power consumption, typically only 2 x AAA batteries/year
Separate low battery and loss of signal notifications
Life-time cloud service provided free of charge
Powerful APP for your Smartphone provided free of charge
User can create floorplans in the APP showing device location
APP records last 30 activations time and date stamped
3M double sided tape for permanent fixing included
Blue LED for status indication
Schedule up to 4 periods per day when unit is automatically turned off
3
register
1
3
choose Wireless Pairing