Advertisement
Advanced Information for the DEVICE PAGE
PANIC KNOB
PANIC KNOB
DOOR SENSOR
TEMP. SENSOR
VIBRATION SENSOR
How to share an Alert Notification from a DEVICE with another Smartphone
1
2
PANIC KNOB
press edit
1.
Ensure that the free 'NEXUSHOME ' APP has been installed on the other Smartphone and complete the registration process, following the
procedure detailed in "Installing the APP" above.
2.
Press
at the top right of the Device Page in the APP on the Smartphone.
3.
Now select the Knob you wish to share, then press
used when registering their user profile. Press
4.
Open the APP on that other User's Smartphone and press
This will take you to the APP's SETTINGS PAGE. In the section "Received Device" you will see a number in green. This denotes the number
of Devices that you have selected to share with that User.
5.
Press "Received". This will take you to a list of those Devices. The new User can now choose whether to accept or reject Notifications
from those Devices. Note that the new User can select, separately, on their APP's Device Alert Page whether such notifications are
Audible, Silent or Off.
How to delete a DEVICE from the APP
Whilst on the DEVICE PAGE, hold and swipe the Devices Description to the left of your screen and press
For Android, just press and hold then confirm with the prompt window for deletion.
Press to Refresh/Reset the Device Page and stop a flashing Knob Icon.
Press this Icon, at the top of the page, to return to the APP's Home Screen
(iOS only, for Android press back on smartphone).
Enables you to share Alert notifications for a Knob with any other user who has already
downloaded the Nexus APP. See below for full details. Whilst in this section, you can also alter
the order in which the Devices are listed on your screen. Press
whose order you wish to change and then drag it to its new position on the screen.
A personalized description of the Knob.
Press the Knob's Icon, to go to its HISTORY page and press "PANIC KNOB" seen just above the ID.
Complete CHANGE DEVICE NAME and save it.
This is the Device's unique ID.
Personalized Icon or Photo for the Knob.
Press the Knob's Icon to go to its HISTORY PAGE, then press its Icon again on
this page. Choose "Take photo", "From album" or "Default icons" to create a
personalized Icon.
Flashing - Indicates a Knob has sent an Alert notification.
Press the Icon to go to the Knob's HISTORY PAGE
Indicates a Low Battery.
Although batteries should continue to last for up to a month after this Icon
appears, you should change them immediately, respecting the correct polarity
and using good quality Alkaline batteries. Always test a Knob after replacing the
batteries.
The Knob sends a "heartbeat" signal to the Router every 4 hours.
This Icon indicates that contact has been lost between them.
Shows that a Device is active.
Click on this Icon to toggle the Device to be active or non-active
Indicates whether the Knob is also sending an Alert Signal to the optional Nexus
Indoor Siren (sending a signal as shown). Press the Knob's icon to go to DEVICE
HISTORY, then press the Siren Icon on that page to toggle Off
Press this icon to return to the APP's Alert Mode Screen.
Press this icon to take you to the APP's Floorplan Screen.
Here you can create personalized Floorplans showing the locations of Doors and Windows
and individual Knobs (see below)
3
PANIC KNOB
press share
and complete the "Share Device to" box with the other user's email address they
to exit.
PROFILE at the bottom of the opening Home Page.
3
on" the right of the Device
4
5
press "Received Device"
Advertisement
