Radio Bridge RBM101i-319 User Manual page 16

0019 Radio receive start
failed
001a Radio config failed
001b Radio receive out
of memory
001c Radio transmit
underflow
001d Radio transmit
channel busy
001e Test mode
command failed
001f Write to flash failed An attempted write to flash failed
0020 Radio receive
config failed
0021 Radio transmit data
load failed
0022 Radio transmit start
failed
0023 Serial transmit
overflow
0024 Bootloader failed
0025 Invalid baud rate
0026 Duplicate buffer
full
C © 2017, R
OPYRIGHT ADIO
An attempt to start the radio receiver failed
Configuration of the radio during initialization failed
The radio receive buffer is out of memory, packet receive
failed
Radio transmit underflow condition
Radio transmit channel busy condition
An action related to a test mode (test carrier or test
packets) failed.
The configuration of the radio receiver failed
Loading data into the transmit buffer on the radio failed
Starting the transmit operation on the radio failed
The serial port had a transmit overflow condition and
thus data has likely been lost from the module back to
the host.
The initialization of the bootloader has failed and
bootloader cannot run
The baud rate setting is invalid, baud rate is unchanged
The buffer that tracks duplicate packets had an overflow
condition.
B I .
RIDGE NC
R B
ADIO RIDGE
R B RBM101 U
ADIO RIDGE I
RBM101 U G
I SER UIDE
G P 15 19
SER UIDE AGE OF