Table of Contents
Advertisement
100
en | Network
With a 0.0.0.0 setting, the encoder for the stream operates in
multi-unicast mode (copying of data stream in device). The
camera supports multi-unicast connections for up to five
simultaneously connected receivers.
Duplication of data places a heavy demand on the CPU and can
lead to impairment of the image quality under certain
circumstances.
13.5.3
Port
Enter the port address for the stream here.
13.5.4
Streaming
Click the checkbox to activate multicast streaming mode. An
activated stream is marked with a check. (Streaming is typically
not required for standard multicast operation.)
13.5.5
Multicast packet TTL
A value can be entered to specify how long the multicast data
packets are active on the network. If multicast is to be run via a
router, the value must be greater than 1.
2015.04 | v1.592 | AM18-Q0678
Camera Browser
Interface
Bosch Security Systems
Advertisement
Table of Contents
