Hardware Features - MEDIATEK LinkIt 7697 HDK User Manual

Hardware Features
This section lists the LinkIt 7697 HDK features. For more detailed specification of MT7697, please refer to the
MT7697 datasheet.
•
192MHz ARM Cortex-M4 CPU with FPU support.
•
352KB RAM.
•
4MB Flash storage.
•
802.11 b/g/n 2.4GHz Wi-Fi.
•
Bluetooth Low Energy support.
•
On-board chip antenna.
•
I-PEX connector provided.
•
CP2102N USB-to-UART convertor.
•
Passed FCC / CE certifications.
•
Support two operational power voltages: 5V and 3.3V.
•
Pin headers for 5V / 3.3V / GND / Reset / GPIO (18) / PWM (18) / UART (2 sets) / IR (1 set) / EINT (4) / I2S
(1 set) / I2C (1 set) / SPI (1 set) / ADC (4) and USB UART (1 set).
•
Two buttons are provided. The RST button (connected to the RST pin) and the USR button (connected to
the P6/GPIO37).
•
Four LEDs are provided. One is for the power indicator and one is for the user-defined behavior
(controlled by P7/GPIO36). The other two are used for indicating the TX / RX status of UART0.
•
Breadboard compatible form factor for the pin pitch (2.54mm).
This document contains information that is proprietary to MediaTek Inc. ("MediaTek") and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
© 2015 - 2017 MediaTek Inc.
LinkIt 7697 HDK v10 User's Guide
Page 10