MEDIATEK LinkIt 7697 HDK User Manual page 10

3) Click (press and release) the RST button.
4) Wait for 1 second and then release the USR button.
After step 4, the board will go into the Flash Recovery mode and you can then use the Flash tool or the QA tool
with it.
If you choose the mt76x7-uploader to update the flash, the tool itself will handle the flash mode switch
automatically without user intervention.
This document contains information that is proprietary to MediaTek Inc. ("MediaTek") and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
© 2015 - 2017 MediaTek Inc.
LinkIt 7697 HDK v10 User's Guide
Page 9