How To Quicktune™ A Comm Frequency From The Data Base; To Adjust The Volume By Overriding The Automatic Squelch - BENDIXKing KLX 135 Quick Reference

How to QuickTune™ a COMM frequency from the data base:
1. Locate the Airport (APT ) pages for the facility you desire to communi-
cate with. The APT 4 page displays the frequency type (TWR = Tower
Freq, GRND = Ground Control, etc.) and frequency.
B
Pull
VOL
TEST
OFF
COMM
Pull
25K
B
2. Press the
to scan through all the airport's frequencies. There may be more fre-
quencies than can be displayed at one time.
B
Pull
VOL
TEST
OFF
COMM
Pull
25K
3. When you have the cursor over the desired frequency, press
and that frequency will become the standby frequency in the COMM
transceiver.
B
Pull
VOL
TEST
OFF
COMM
Pull
25K

To adjust the volume by overriding the automatic squelch:

1. Pull out on the small knob in the upper left cor-
ner of the KLX 135. This will either allow you
to receive a distant, weak signal or give you a
noise reference by which to adjust the volume.
2. Push the volume knob back in for normal squelch operation.
136.97 KDAL
118.00 ATIS
>Leg CLR
APT+4 GRND
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
MSG D
button to turn the cursor on and use the right outer knob
136.97 KDAL
118.00 ATIS
ÉÑ>Leg CLR
APT+4 GRND
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
MSG D
136.97 KDAL
120.15 ATIS
>Leg CLR
APT+4 GRND
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
MSG
D
-5-
120.15
127.90
121.75
CLR ENT
120.15
127.90
121.75
CLR ENT
120.15
127.90
121.75
CLR ENT
B
VOL
OFF
KLX 135
CRSR
GPS
Pull
SCAN
KLX 135
CRSR
GPS
Pull
SCAN
F
KLX 135
CRSR
GPS
Pull
SCAN
Pull
TEST