Advertisement
REVAMP4240T
•
Clip –
overload led indicates that the amplifier is overloaded
or clipping: reduce the incoming signal immediately to avoid
overloads or clipping and eventually amplifier shutdown.
•
Limit –
muted indicates that the internal limiter is active or that
the channel is muted by pushing the mute button.
•
Signal
-40dB indicates that a signal is present at the input
•
Mute button:
•
Bridged led
(yellow) lights up when bridge mode is selected via
the rear panel bridge pushbutton.
Instruction manual
push to mute/unmute the channel.
11
Advertisement
