Page 190
I1—BY-PASS SWITCH CIRCUIT
a.
nect red lead to 2W in connector 016.
. Meter should read infinity (7.).
. Have someone hold switch down. Meter should
read 0 ohms.
. If any reading is faulty, go to BY-PASS SWITCH
CIRCUIT.
IZ—CONTROL BOX GROUND CIRCUITS
a.
Leave black lead connected to ground. Connect
red lead to 5W in Connector 016.
b. Meter should read 0 ohms. If meter reads more
than 0 ohms. check 5W from connector to
ground Connection in front of control box.
Check ground connection.
13—CONTROL BOX POWER CIRCUITS
a.
ignition key warning system works. If system
B.