Crock-Pot Swing and Serve Owner's Manual page 4

CROCK-POT SWING AND SERVE™ SLOW COOKER COMPONENTS
®
Fig. 1
Removable Lower Lid
Removable Stoneware
Side Carrying Handle
Temperature Setting
Control Knobs
Fig. 2
187036 Rev A_16EM1.indd 7-8
Lid Lifting Handle
Removable Upper Hinged Lid
Removable Upper Cooking Pot
Removable
Utensil Holder
Upper Heating Unit
Cool Touch Tab
Pivoting Swing Arm
Lower Heating Base
LED Power Light
Fig. 3
Cord Management
-6-
PREPARING YOUR SWING AND SERVE™ SLOW COOKER FOR USE
Before you use your slow cooker, remove all packaging components and
wash the lids and stoneware/cooking pots with warm soapy water and
dry thoroughly.
Assembly
1. Rotate the two Upper Heating Units into the fully open position
using the Cool Touch Tabs (see Fig. 1) and remove the upper hinged
lids. Then place the two smaller cooking pots into the Upper Heating
Units. Replace the hinged lids after the cooking pots have been
inserted, and bring the Upper Heating Units back together into the
closed position (see Fig. 2). Please see directions on the next page for
how to remove/replace the Upper Hinged Lids.
2. Swing the two upper units apart, in order to access the lower slow
cooker. Place the larger stoneware into the Lower Heating Base.
3. Lower the glass lid horizontally down onto the stoneware in the lower unit.
-7-
11/21/16 11:29 AM