Main Unit - Philips DVDR3455H User Manual

a b
a STANDBY-ON
– Turns on the recorder or switch to
standby mode.
b Disc tray
c OPEN/CLOSE ç
– Opens/closes the disc tray.
d Display panel
– Show information about the current
status of the recorder.
e IR
– Point the remote control towards this
sensor.
f HDD Active indicator
– Blue indicator lights up while temporary
recording to the time shift buffer is in
progress.
g
u
– Starts playback of the selected title/track.
– Pauses playback of the selected title/
track.
. / >
– Skips to the previous or next chapter/
track, or hold down the key to make a
reverse/forward search.
– Stops playback/recording.
h
– Starts recording the current TV channel
or the current video input source.
– Red ring lights up while recording to the
HDD or a recordable DVD disc is in
progress.
c
d e
Jacks behind the fl ap
Flip down the door as indicated by the
OPEN É label at the right hand corner.
i CAM1 (VIDEO)
– Video input for camcorders or video
recorders.
In tuner mode, press SOURCE on the
remote control repeatedly to select
'CAM1' when using this input source.
j L/R AUDIO
– Audio input for camcorder or the audio/
video device which is connected to the
CAM1 or CAM2 jack.
k CAM2 (S-VIDEO)
– S-video input for SVHS/Hi8 camcorders
or SVHS/Hi8 video recorders.
In tuner mode, press SOURCE on the
remote control repeatedly to select
'CAM2' when using this input source.
l DV IN
– Input for digital camcorders or other
suitable devices using this connector.
Press USB/DV on the remote control
when using this input source.
m USB
– Input for USB fl ash drive / USB memory
card reader.
Press USB/DV on the remote control
when using this input source.

Main Unit

fgh
i
k l m
j
11