Using Your Electronic Control - AGA marvel ML15CL Installation, Operation And Maintenance Instructions

On/off
Display icons:
"ON/OFF" icon : used for turning the appli-
ance on and off.
"MENU" icon : used to access optional func-
tions in the user interface.
"LIGHT" icon: used to turn the interior light
on and off, glass door models only.
"Clock" icon : used to enter the Delay start/
vacation mode.
"LOCK" icon : used to lock out functions in
the user interface.
Display area text:
Signifies the appliance is on and producing
ICE
ice.
Signifies the appliance is in economical ice
ECO
production mode.
Signifies the appliance is off
OFF
Signifies a door ajar alarm condition.
DOOR
Cleaning is recommended or the appliance
CLEAN
is in the clean mode.

USING YOUR ELECTRONIC CONTROL

Menu Display area
ICE
1 4 6 8
hours
days
OFF CLEAN
Figure 20
User interface display
Light
DOOR
ECO
Delay start/Vacation mode:
hours 1
days
Hours or days timer is set for
Hours or days will be lit
When lit, this signifies the delay start/vacation mode is opera-
tional.
NOTE
The control display is covered with a clear plastic protec-
tive film. This film may be removed by carefully lifting at a
corner.
Starting your clear ice machine:
Plug the ice machine into a 115 volt wall outlet,
(see page 5 for electrical information). Your appli-
ance is shipped from the factory in the "ICE" mode and will
begin start-up of ice production after the start-up routine.
Upon applying power to the unit, or after a power interrup-
tion, the Ice machine will perform a self-test, followed by a
harvest cycle to clear any in-process ice production. This
start-up routine, ("after power is applied to the unit"), takes
approximately 13 minutes to complete before an ice pro-
duction cycle starts.
If the appliance does not start, confirm the wall outlet has
power, and the control is in the "ICE" mode, (see Options
section below). Do not start the ice machine in "ECO"
mode. "ECO" mode should only be used after there is a full
bin of ice.
14
Delay timer Lock
4
6
8
ICE