Seatbelt Height Adjustment; Seatbelt Warning Lamp And Indicator Chime - Ford Taurus2017 Owner's Manual

Allow the belt to retract. As the belt
retracts, you will hear a clicking sound. This
indicates the seatbelt is now in the
automatic locking mode.
How to Disengage the Automatic
Locking Mode
Unbuckle the combination lap and
shoulder belt and allow it to retract
completely to disengage the automatic
locking mode and turn on the vehicle
sensitive (emergency) locking mode.
SEATBELT HEIGHT
ADJUSTMENT
WARNING
Position the safety belt height
adjusters so that the belt rests
across the middle of your shoulder.
Failure to adjust the safety belt properly
could reduce the effectiveness of the
safety belt and increase the risk of injury in
a crash.
Adjust the height of the shoulder belt so
the belt rests across the middle of your
shoulder.
Conditions of operation
The driver's safety belt is not buckled
before the ignition switch is turned to the
on position...
The driver's safety belt is buckled while the
indicator light is illuminated and the
warning chime is sounding...
The driver's safety belt is buckled before
the ignition switch is turned to the on posi-
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Seatbelts
If...
tion...
E146191
To adjust the shoulder belt height:
1. Press the button and slide the height
adjuster up or down.
2. Release the button and pull down on
the height adjuster to make sure it is
locked in place.
SEATBELT WARNING LAMP
AND INDICATOR CHIME
This lamp illuminates and an
audible warning will sound if the
driver's safety belt has not been
E71880
fastened when the vehicle's ignition is
turned on.
The safety belt warning light illuminates 1-
2 minutes and the warning chime sounds
4-8 seconds.
The safety belt warning light and warning
chime turn off.
The safety belt warning light and indicator
chime remain off.
33
Then...