Problems & Solutions - EcoMotion MINI Pro User Manual

Problem
Speed / range
reduce
No power while
battery switch
"on" (display
doesn't work)
PAS system
doesn't work
EcoMotion Bikes
Possible cause
Low tire air pressure
Brake pads rubbing
against their discs
PAS magnets away
from sensor
Low battery
Battery lifetime is over /
shortened
Ridding conditions
(headwind, climbing,
etc.)
Burnt fuse
Loos connector
Rupture wire
Faulty switch
Faulty controller
Battery lifetime is over /
battery not charged.
Faulty display
Motor shutdown
system operated
PAS magnets away
from sensor
Faulty PAS sensor
Faulty controller
Display rupture wire
Solution
Inflate tiers to recommended
pressure
Adjust brakes and / or caliper
Attached the magnets to the
sensor
Charge the battery full charge
Replace the battery
Reduce range to be expected
Replace the fuse
Check all connectors
Inspect all wires for damage
Replace switch and retest
Replace controller and retest
Replace / charge the battery and
retest
Replace the display and retest
Make sure that bake handles in
their place
Attached the magnets to the
sensor and retest
Replace the sensor and retest
Replace controller and retest
Replace the display and retest
23