EcoMotion MINI Pro User Manual page 12

Make sure that the breaks are properly functioning, also be
sure to check that the brake pads are well operating, and are
not overly worn. In such cases in which pads / breaks must be
replaced this must be performed at proper bicycle shop or by
a professional with sufficient knowledge.
Be sure to check that both of the tires are not punctured.
Make sure to check that the tires are not overly worn, as
these will have poorer road grip, if the tires are overly worn,
be sure to replace them before using the bicycle.
Be sure to check that the rims are not broken or cracked if
one or both rims are cracked or broken, it/they must be
replaced.
The bicycle includes front and rear flashlights & a horn, be
sure to check that all of them are functioning prior to riding
the bicycle.
Make sure that all components of the bicycle are well set in
their place.
Make sure that there are no pressure marks or cracks or
breakage in the frame.
Make sure that the tires are properly pressurized, according to
the pressure range indicated on the tires.
Low tire pressure will result in lower riding range.
High tire pressure may result in a punctured or flat tire.
Make sure the bicycle's battery is functioning and any
physical pulping or damage does not appear on it.
Make sure that the battery is properly mounted on the bicycle
prior to use.
Make sure that the TAG / PAS systems are properly
functioning.
EcoMotion Bikes 12