Sony Trinitron KV-B14PD1 Operating Instructions Manual page 8

Using the Child Lock
feature
You can prevent a child from watching certain program
positions by using the buttons on the remote
commander.
÷
0
+ or –
SELECT
1
Select the TV program you want to lock.
2
Press SELECT until "CHILD LOCK" appears
on the screen.
SELECT
CHILD LOCK
3
Press + or – until "LOCKED" appears on the
screen.
LOCKED
Notes
• To unlock the program position, repeat steps 1 to 3 as above
until "LOCKED" disappears from the screen.
• To prevent your child from unlocking the program position,
keep the remote commander away from your child.
10
Operations
Watching the picture
in wide mode
You can adjust the display mode accordingly to fit the
programs to your TV screen size.
Press WIDE/V-ZOOM repeatedly until the wide
display mode you want appears on the screen.
WIDE/
V-ZOOM
TV
Normal display
mode "WIDE" mode
NORMAL WIDE
G o o d - b y e , J a n e
G o o d - b y e , J a n e
G o o d - b y e .
G o o d - b y e .
"V-ZOOM" mode
V-ZOOM
Adjusting the Adjusting the picture
picture
Note on the SOUND MODE button
• The sound mode feature is unavailable for your TV. Thus, the
SOUND MODE button on the remote commander is not used
for your TV.
SOUND ÷
0
MODE
+ or –
SELECT
PIC MODE
Selecting the picture mode
Press PIC MODE until the mode you want
appears.
PIC MODE
Each time you press PIC MODE, the screen changes as
follows:
High contrast Normal
picture Soft picture picture
DYNAMIC SOFT STANDARD
Note
• If you change the picture mode after the following
adjustments, the adjustment changes in accordance with the
picture mode.
Adjusting the picture setting
1
Press SELECT until the item you want to
adjust appears.
SELECT
Each time you press SELECT, the screen changes
as follows:
PICTURE COLOR
BRIGHT
(Operative for
NTSC signal only)
SHARPNESS HUE
2
Press + or – to adjust the item.
3
To adjust other items, repeat steps 1 and 2.
Note
• You can also use SELECT and VOLUME +/– on the TV to
adjust the picture setting.
Front of TV
R
COLOR SYSTEM SELECT TV SYSTEM
MANUAL PROGR AUTO PROGR
If the picture color is abnormal when receiving
programs through the ˘ (antenna) terminal
Change the "COLOR SYSTEM" setting or adjust the "COLOR" level
in the on-screen display until the color becomes normal.
If the picture color is abnormal when receiving
programs through the video input jack
Change the "COLOR SYSTEM" setting or adjust the "COLOR"
level in the on-screen display until the color becomes normal.
Note
• Normally set "COLOR SYSTEM" to "AUTO".
11
Operations