A Board Adjustment After Ic003 (Memory) Replacement; Picture Distortion Adjustment - Sony Trinitron KV-B14PD1 Operating Instructions Manual

KV-B14PD1
RM-883
5-3. A BOARD ADJUSTMENT AFTER IC003
(MEMORY) REPLACEMENT
1. Enter to Service Mode.
2. Press commander buttons [5] and [0] (Data Initialize), and [2]
and [0] (Data Copy) to initialize the data.
3. Call each item number, and check if the respective screen shows
the normal picture.
In case some items are not well-adjusted, give them fine
adjustment.
Write the data for each item number ([MUTING] + [0]).
4. Select item numbers "31" (OP0), "32" (OP1) and "33" (OP2)
and set the bit with command buttons [3] and [6].
5. Press commander buttons [8] and [0] (Test Normal) to return
all user adjustments to the data that was set on shipment from
the factory.
(= Cancel Service Mode).

5-4. PICTURE DISTORTION ADJUSTMENT

Item Number 00 – 08
00 HSF (H SHIFT)
00 HSF (H SHIFT)
01 HSZ (H SIZE) 01 HSZ (H SIZE)
02 PAP (PIN AMP)
02 PAP (PIN AMPLITUDE)
03 CNP (CORNER PIN)
03 CNP (CORNER PIN)
04 TLT (TILT)
04 TLT (TILT)
05 VSL (V SLOPE)
05 VSL (V SLOP)
06 VAP (V AMPLITUDE)
06 VAP (V ANP)
07 SCR (S CORRECTION)
07 SCR (S CORRECTION)
08 VSF (V SHIFT)
08 VSF (V SHIFT)
– 22 –