G2 (Screen) And White Balance Adjustments - Sony Trinitron KV-B14PD1 Operating Instructions Manual

KV-B14PD1
RM-883
3-4. G2 (SCREEN) AND WHITE BALANCE
ADJUSTMENTS
1. G2 (SCREEN) ADJUSTMENT (RV701)
1) Set the PICTURE and BRIGHTNESS to normal.
2) Put to VIDEO input mode without signals.
3) Connect R, G and B of the C board cathode to the
oscilloscope.
4) Adjust G2 (RV701) volume to the value below.
165±2 V
2. WHITE BALANCE ADJUSTMENTS
1) Set to Service Mode.
2) Input an entire white signal.
3) Set the PICTURE to maximum.
4) Select RDR(09) with [1] and [4] , and then set the level to 25
with [3] and [6] .
5) Select GDR(0A) and BDR(0B) with [1] and [4] and adjust the
level with [3] and [6] for the best white balance.
6) Write into the memory by pressing [MUTING] , then [0] .
0 V
– 16 –