Controls; Residual Heat Indicator; Before Using For The First Time; Cleaning The Appliance - Siemens ET475FYB1E Instruction Manual

Indicators
Stopwatch
þ
°C Temperature
Rear heating zone switched off
ù

Controls

Switches on the appliance
#
Activates the wipe protection/childproof lock
„
Switches on the cleaning setting
...
Switches on the warming setting
f
0||240° Sets the temperature
Switches off the rear heating zone
ù
Switches on the kitchen timer/stopwatch
0
Controls
Touching a symbol activates the associated function.
Notes
The settings will remain unchanged if you touch
■
multiple symbols at once. This allows you to wipe up
spills on the control panel.
Always keep the controls dry. Moisture reduces their
■
effectiveness.

Residual heat indicator

The appliance has a two-stage residual heat indicator.
If appears on the display, the appliance is still hot. As
•
the appliance cools down further, the indicator changes
to œ . The indicator goes out when the appliance has
cooled sufficiently.

Before using for the first time

KBefore using for the first
time
In this section, you can find out what you must do
t h e f i r s t t i m e B e f o r e u s i n g f o r
before using your appliance to prepare food for the first
time. Read the safety information before you
start.~ "Important safety information" on page 4

Cleaning the appliance

Before using the appliance for the first time, clean it
thoroughly with lukewarm soapy water.

Heating the Teppan Yaki

To get rid of the new cooker smell, heat up the empty
Teppan Yaki. 30 minutes at 240 °C is ideal.
en
7