Related Manuals for Domenor D82
Summary of Contents for Domenor D82
- Page 1 SPEED DOME OPERATION MANUAL Speed d ome camera look s like a mysterious owl at night, quiet, make a comprehensive view, b e se nsitiv e to catch. PDF created with pdfFactory Pro trial version www.pdffactory.com...
-
Page 2: Table Of Contents
TABLE OF CONTENT Precaution ----------------------------------------------------------------------------------------------------1 2. P erformance-------------------------------- ----------------------------------- ---------------------2 2.1 Dome parameter ------- --------------------- ----- -------- -------------- ---------------------------------- 2.2 Camera parameter----------- ------------------------------------------ ------------------------------- 2.3 Performance & Feature ----------- -------------------------------------- ----- ---------------------------------- Function instruction ------------------------------------------------ -----------------------------4 3.1 C amera ID --------------- ----- -------------------- ------------... - Page 3 Functi on setting -------------------------------- ------------ ------------ ----------------------------------22 Preset ------------- --------------- ------- ------- ---------------------------------------------------- Scan -------------- --------------------------------- ------- --------------------------------------------- Pattern ---------------- --------------------------- --------- -------------------------------------------- 6. 4 Tour------------ --------------------- ------- -------------- ----------------------------------------- Zone ---------------- ---------------------------- --------------------------------------------------- Privacy z one masking ------------------------------------------------------------------------------------27 Appendix ----------------------------------------------------------------------------------------------------28 8.1 Menu index----------------------------------------------------------------------------------------28 8.2 Troubleshooting---------------------------------------------------------------------------------------29...
-
Page 4: Precaution
Precaution 1. Precaution Ø Electrical safety Conform to country and local electrical safety standard when using or installing the product. Ø Transportation The dome should be protected against extremes of pressure, vibration and humidity during storage installation and transportation. It should be shipped as the original packing did when customers send it back for repair. -
Page 5: Performance
Performance 2. 1 Dome parameter Electrical： Setting: （ ） 2400/4800/9600/19200bps AC 24V Power supply Baud rate RS485 Pelco, Kalatel, Diamond, and Protocol Consumption 16 protocols, ～ Address setting Decoder B uilt-in Operation: Envi ronmental: ° ～ 360 continuously Operational environment Pan rotation +50℃... -
Page 6: Performance & Feature
Performance 2. 3 Performance and feature A series of intelligent high speed dome is the latest design, built-in heat radiator device, convenient installation, and black cover which make an invisible surveillance. The camera rotates smartly with little noise, and has all kinds of functions, in order to supply perfect image to customer. Ø... -
Page 7: Function Instruction
Function Instruction 3. Function Instruction This passage mainly describes the main function and general principle of integrative speed dome, and does not refer to the concrete operation methods. Different system platform has different operation methods, generally, we should according to the system manufactory's operation manual. Please contact dealer to get necessary information, under some conditions there are have some particular requirements and operations. -
Page 8: Camera Control
Function Instruction 3. 3 Camera control Ø Magnification control “ ” The user can control Wide/Tele to adjust zoom far and near of the image by keyboard controller to obtain panoramic image or close view that you need. The speed dome support optical zoom and digital zoom. Ø... - Page 9 Function Instruction Ø Scan The operator can prompt set right limit and left limit in advance by keyboard and menu, so as to make the camera repeatedly scanned between right and left limit at setting speed. Ø Pattern Pattern is built-in function in camera; the speed dome can record tracks that are no less than 180s, when running pattern, the dome moves repeatedly according to the recorded tracks.
-
Page 10: System Setting
System Setting 4. System setting 4. 1 Basic operation 4. 1. 1 Self-testing The dome conducts self-testing after current-carrying , and it rotates slowly until displaying pan origin that is default setting, then moving to tilt origin, the lens is adjusted from far zoom to near zoom, then from near zoom to far zoom, when self-testing is finished, there is relevant system information displaying on the screen, as follow: Dome model... -
Page 11: Edit Dome Label
System setting 4. 2 Edit dome label MAIN MENU When using a lot of domes, in order to identify each dome, the systems SYSTEM SETTING ： support title setting. The setting ways as follow CAMERA SETTING FUNCTION SETTING The system enters into the main menu by calling 95 preset or by calling WINDOW BLANKING 9 preset twice within 3 seconds. -
Page 12: Initial Information
System Setting 4. 3 Initial information MAIN MENU The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 【 】 2. Operate joystick and move the cursor to SYSTEM SETTING , press EXIT 【... -
Page 13: Display Setup
System setting 4. 4 Display setup MAIN MENU 1. The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 【 】 Operate joystick and move the cursor to SYSTEM SETTING , press WINDOW BLANKING 【... -
Page 14: Systematic Motion Control
System Setting 4. 5 Systematic motion control MAIN MENU Systematic motion controlling may control a series of canonical mov- SYSTEM SETTING ement of the dome, and plays an important role in controlling the image of CAMERA SETTING the dome. FUNCTION SETTING WINDOW BLANKING . -
Page 15: Park Actio
System setting 4. 5. 3 Park action This setting allows the dome to run an appointed action after it enters MOTION vacancy for a few time (1-240minutes). If default sets as 0, it means not to AUTO FLIP run this action. PROPORTION PAN PARK TIME 【... -
Page 16: Clear
System Setting 4. 6 Clear MAIN MENU . The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 【 】 WINDOW BLANKING Operate joystick and move the cursor to SYSTEM SETTING , press EXIT 【... -
Page 17: Camera Setting
Camera setting 5. Camera setting MAIN MENU 5. 1 Zoom speed SYSTEM SETTING CAMERA SETTING The system enters into the main menu by calling 95 preset or by calling 9 FUNCTION SETTING preset twice within 3 seconds. WINDOW BLANKING EXIT 【... -
Page 18: Digital Zoom Control
Camera Setting 5. 2 Digital zoom control MAIN MENU The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING WINDOW BLANKING 【 】 Operate joystick and move the cursor to CAMERA SETTING , press EXIT 【... -
Page 19: Back Light Compensation
Camera setting 5. 3 Back light compensation MAIN MENU The system enters into the main menu by calling 95 preset or by calling 9 SYSTEM SETTING preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 【 】 . Operate joystick and move the cursor to CAMERA SETTING to enter WINDOW BLANKING... -
Page 20: Slow Shutter Control
Camera Setting 5. 4 Slow shutter control MAIN MENU The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING WINDOW BLANKING 【 】 Operate joystick and move the cursor to CAMERA SETTING to enter EXIT submenu. -
Page 21: Ir Cut Filter
Camera setting 5. 5 IR cut filter MAIN MENU . The system enters into the main menu by calling 95 preset or by SYSTEM SETTING calling 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 【 】 . Operate joystick and move the cursor to CAMERA SETTING WINDOW BLANKING enter submenu. -
Page 22: Line Sync Control
Camera Setting 5. 6 Line sync control MAIN MENU SYSTEM SETTING The system enters into the main menu by calling 95 preset or by calling CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 【 】 Operate joystick and move the cursor to CAMERA SETTING , press EXIT 【... -
Page 23: Advance Setting
Camera setting 5. 8 Advance setting MAIN MENU The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 【 】 Operate joystick and move the cursor to CAMERA SETTING to enter WINDOW BLANKING... -
Page 24: White Balance Mode
Camera Setting 5. 8. 2 White balance mode MAIN MENU 【 】 【 】 System supports AUTO , indoor mode INDOOR , outdoor mode SYSTEM SETTING 【 】 【 】 【 】 OUTDOOR , auto track mode ATW , single mode OPW , CAMERA SETTING 【... -
Page 25: Function Setting
Function setting 6. Function setting MAIN MENU 6. 1 Preset SYSTEM SETTING . The system enters into the main menu by calling 95 preset or by calling CAMERA SETTING “ 9 preset twice within 3 seconds. click each command to enter preset m- FUNCTION SETTING ”... -
Page 26: Scan
Function Setting 6. 2 Scan MAIN MENU Scan is that pre-seting the right and left limit of dome, then the camera SYSTEM SETTING repeatedly scan between the two points at a stable speed, the same magnification CAMERA SETTING and pan. Each dome only has one scan tour. FUNCTION SETTING The system enters into the main menu by calling 95 preset or by calling WINDOW BLANKING... -
Page 27: Pattern
Function setting 6. 3 Pattern MAIN MENU Pattern is built-in function in camera; the speed dome can record tracks SYSTEM SETTING that are no less than 180s. (A series of pan/tilt controlling and lens control- CAMERA SETTING ling command). A dome may set up to 4 pattern tours. FUNCTION SETTING 1. -
Page 28: Tour
Camera Setting 6. 4 Tour MAIN MENU Tour is the built-in function in the speed dome, it will arrange the presets SYSTEM SETTING into the queue of auto-tour, and can set how long it will park at preset. CAMERA SETTING Operate auto-tour is a process of incessantly transfer each preset. -
Page 29: Zone
Function setting 6. 5 Zone MAIN MENU Each dome may be set up to 8 zones; the regional scene can't be overlapped. SYSTEM SETTING 【 】 User will set label for each zone. When setting ZONE LABEL as ON, CAMERA SETTING the dome will display zone label as it runs some zone. -
Page 30: Privacy Zone Masking
Privacy zone masking 7. Privacy zone masking MAIN MENU Privacy function can show someone piece of regional shielding while SYSTEM SETTING protecting. For example, protect the window of bedroom or ATM of bank. A CAMERA SETTING dome can set up to 24 privacy windows.(Masking setting function is relative FUNCTION SETTING with the model of camera module. -
Page 31: Appendix
Appendix 8. Appendix 8. 1 Menu Index PDF created with pdfFactory Pro trial version www.pdffactory.com... -
Page 32: Troubleshooting
Appendix 8. 2 Troubleshooting Solution Trouble Possible causes Check the po wer supply to see if it is connected 1.The 24V AC power supply is not connected to the or confirm if the plug contact well. port of the power board or the contact is not good. -
Page 33: 24Vac Wire Diameter And Transmission Distance Comparison Chart
Appendix 8. 4 24V AC Wire Diameter and Transmission Distance Comparison chart The transmission distances listed below are farthest ones recommended for each giving wire diameter when the 24VAC voltage loss ratio is below 10%(for equipment powered by AC, the allowed maximum voltage loss ratio is 10%). The power consumption of this dome is 12W. For example, 5 sets of equipments install 47 feet (14m) away from transformer, need total power of 60VA(5X12VA), need a wire with a minimum diameter of 0.8mm. -
Page 34: Domestic And Board Wire Gauge Conversion Chart
Appendix 8. 5 Domestic and Board Wire Gauge Conversion Chart Bare Wire Cross-Sectional Bare Wire Diameter mm 2 ） (Approximate) Area（ Metric Size( (Apprximate) 0 .0 50 0 .0 01 9 6 0 .0 60 0 .0 02 8 3 0 .0 70 0 .0 03 8 5 0 .0 80... -
Page 35: Rs485 Bus Basic Knowledge
Appendix 8. 6 RS485 Bus Basic Knowledge Ø Characteristics of RS485 Bus Ø Ω The connection of 120 termination resistor: As specified by RS485 standard, RS485 Bus is of The termination resistor is ready on the protocol PCB. half-duplexed data transmission cables with chara- The are two kinds of connection(as show 8-6.3 form). - Page 36 Appendix Ø Problems in practical connections In such circumstances the factory recommends the usage of RS485 distributor. The distributor can In some circumstances user adopts a star co- change the star configuration connection to the mode nfiguration in practical connection. The termina- tion resistors must be connected to the two equi- of connection stipulated in the RS485 standards.
-
Page 37: Dip Switch Setup
Appendix （ ） 8. 7. 1 Baud rate setup SW2 8. 7 DIP switch setup Please according to "AppdienxRs485 Bus There is a switchboard in the side of dome, Basic knowledge", to check whether Baud lift the metallic button can open the switchboard. rate is satisfied with the demand of transmission There are two 8-bit DIP switches on it. - Page 38 Appendix (Sw1) (Sw1) S w i t c h n u m b e r S w i t c h n u m b e r (Bit) (Bit) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Factory defaul ts 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0...
- Page 39 Appendix S w i t c h n u m b e r (S w1) S w i t c h n u m b e r (Sw1) (Bit) 1 2 3 4 5 6 7 8 (B it) 1 2 3 4 5 6 7 8 0 1 1 0 0 1 1 0 0 0 1 0 0 0 1 0 1 1 1 0 0 1 1 0...
- Page 40 Appendix (Sw1) (Sw1) S w i t c h n u m b e r S w i t c h n u m b e r (Bit) 1 2 3 4 5 6 7 8 (Bit) 1 2 3 4 5 6 7 8 0 1 0 1 0 1 0 1 0 0 0 1 0 0 0 1 1 1 0 1 0 1 0 1...
- Page 41 Appendix ( Sw1 ) Switch number (Sw1) S w i t c h n u m b e r (Bit) (Bit) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 0 0 1 1 0 0 1 1 0 1 1 1 0 1 1 1 1 0 1 1 0 0 1 1 1 1 1 1 0 1 1 1...
-
Page 42: Installation
Installation Introduction 9. Installation 9. 1 Wall mount installation 1. Th e installa tion site must be a ble to sup port 、 the sum of we ight such as the dome the b racket and the pedestal four ti mes. . -
Page 43: Installation Introduction
Installation Introduction Please pass the video cable, power cable, and control cable 9. 2 Pendant mount installation through the underframe and the steeve, keep the enough length of connection. Make sure the length of video cable that reserves 1. The installation site must be able to support outside the p endant jointing sleeve is 50mm approximately, and... - Page 44 Maintenance 10. Maintenance service terms (1) Range of warranty The product will be maintain ed free for one year. ● The product will be obtained the fre e m aintenance servic e if the same malfuncti on appears ● again within thre e months. M alfunction of products c aused by force m ajeure (such as war, earthquake, light ning strike ●...
Need help?
Do you have a question about the D82 and is the answer not in the manual?
Questions and answers