Related Manuals for Domenor KVD 20 Color
Summary of Contents for Domenor KVD 20 Color
-
Page 1: User Manual
IP Address:192.168.1.88 User Name:admin Password :admin HDIP General Vehicle PTZ Camera User Manual... -
Page 2: Table Of Contents
TABLE OF CONTENT Precaution ---------------------------------------------------------------------------------------------------1 2. Performance-------------------------------------------------------------------------------------------2 2.1 Dome parameter ------------ ------------------- -------------- ------------------------------------------ 2.2 Camera parameter----------- ----------------------------------------- - ----------------------------- 2.3 Performance & Feature ----------- -------------------------------------- ----- -------------------------------- Function instruction ---------------------------------------------------------------------------------------5 Auto-run motion ----------- ---------------------- ---------- ---------- ---- -------------------------------5 Camera control ------------- ------------------------- -- ----------------------------------------------------------5 - --... - Page 3 5.8.3 White balance mode-----------------------------------------------------------------------25 5.8.4 Image setting function--------------------------------------------------------------------26 5.8.5 Focus---------------------------------------------------------------------------------------26 Function setting -------------------------------------------------------------------------------------------27 Preset ------------- --------------- ------- ------- ------------------------------------------------------ Scan -------------- --------------------------------- ------- ----------------------------------------------- Pattern ---------------- --------------------------- --------- ---------------------------------------------- 6.4 Tour------------ --------------------- ------- -------------- -------------------------------------------30 Zone ---------------- ---------------------------- -----------------------------------------------------31 6.6 Time running---------------- ---------------------------- -------------------------------------------32 Privacy zone masking...
-
Page 4: Precaution
Precaution 1. Precaution Ø Electrical safety Conform to country and local electrical safety standard when using or installing the product. Ø Transportation with care The PTZ should be protected against extremes of pressure, vibration and humidity during storage installation and transportation. The infrared PTZ camera is transported by integrated packing. -
Page 5: Performance
Performance 2. Performance 2. 1 Dome parameter Setting: Electrical： （ ） DC 12V 9600bps Power supply Baud rate RS485 PELCO-D Protocol Consumption Decoder Address setting Built-in Operation: Environmental: ° ℃ 360 continuously Operational environment Pan rotation 60℃ ° ° 0-95% no condensation Vertical up 75 ,vertical down 15 Tilt rotation... -
Page 6: Performance & Feature
Performance 2. 3 PTZ Performance and feature The intelligent Pan/tilt was complete new design, compact structure, built-in constant temperature device and rapidly heat dissipation from chip; wiper function can retain full resolution picture in raining day;Camera rotate flexibly with low noise, wide range capture and certain auto-functions can provide perfect quality of image for customer. - Page 7 Performance Ø Internal temperature test Set real time display ● When the temperature exceeds the limit, the screen will display alarm information. ● When the temperature is under the limit, the PTZ will delay to startup, and when the heat device ●...
-
Page 8: Function Instruction
Function Instruction 3. Function Instruction This passage mainly describes the main function and general principle of intelligence PTZ, and not refer to the concrete operation methods. Different system platform has different operation methods, generally, should according to the system manufactory's operation manual. Please contact dealer to get necessary information, there are some particular requirements and operations under specific condition. -
Page 9: Monitor Function
Function Instruction ● Target moves too fast ● Target area such as wall ● Target is too dark or vague ● Target image is too small Ø Iris control System defaults Auto Iris. Camera can rapidly adjust size of Iris, through the automatically induct the changing of environment ray, and thus make the brightness of deferent image stable. - Page 10 Function Instruction Ø Privacy zone masking The user can set a black shadow to mask the area so that it will not appear on the monitor to protect privacy. （ 。 This function is relative with the type of the PTZ, if zoom camera hasn't this function, it is invalid) Ø...
-
Page 11: System Setting
System Setting 4. System setting 4. 1 Basic operation 4. 1. 1 Self-testing The PTZ conducts self-testing after current-carrying , and it rotates slowly until displaying pan origin that is default setting, then moving to tilt origin, the lens is adjusted from far zoom to near zoom, then from near zoom to far zoom, when self-testing is finished, there is relevant system information displaying on the screen, as follow: PTZ firmware version... -
Page 12: Edit Dome Label
System Setting 4. 2 Edit dome label MAIN MENU ’ When using a lot of PTZs systems, in order to identify each PTZ, SYSTEM SETTING ： the systems support title setting. The setting ways as follow CAMERA SETTING FUNCTION SETTING 、... -
Page 13: I Nitial Information
System setting 4. 3 Display initial information MAIN MENU 、 The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 、 【 】... -
Page 14: Display Setup
System Setting 4. 4 Display setup MAIN MENU 、 1 The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 、 【 】 【 】... -
Page 15: System Motion Control
System Setting 4. 5 Systematic motion control SYSTEM SETTING Systematic motion controlling may control a series of canonical mov- EDIT DOME LABEL ement of the PTZ, and play an important role in controlling the PTZ. INITIAL INFO DISPLAY SETUP 、 MOTION The system enters into the main menu by calling 95 preset or by calling CLEAR... -
Page 16: Park Action
System Setting 4. 5. 3 Park action MOTION This setting allows the PTZ to run an appointed action after it enters AUTO FLIP vacancy for a few time (1-240minutes). If default sets as 0, it means not to PROPORTION PAN run this action automatically. -
Page 17: Advance Setting
System setting 4. 5. 6 Advance setting MOTION 【 】 【 】 1.Operate joystick and move to ADVANCE SETTING press OPEN AUTO FLIP to enter into "advance setting"; PROPORTION PAN PARK TIME ● 【 】 PRESET FREEZE Function of Preset Freeze means during PARK ACTION SCAN BOOT ACTING... -
Page 18: Clear
System Setting 4. 6 Clear and restart MAIN MENU 、 The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING 9 preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING WINDOW BLANKING 、 【 】... -
Page 19: Password Setup
System setting 4. 7 Password set MAIN MENU 1. The system enters into the main menu by calling 95 preset or by calling 9 SYSTEM SETTING preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 【 2. Operate the joystick up and down, move the cursor to SYSTEM WINDOW BLANKING 】... -
Page 20: Clock Setting
System Setting 4. 8 Time set MAIN MENU 1. The system enters into the main menu by calling 95 preset or by calling 9 SYSTEM SETTING preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 【 WINDOW BLANKING 2. Operate the joystick up and down, move the cursor to SYSTEM 】... -
Page 21: Comm Setting
System setting 4. 9 Setup Dome parameter MAIN MENU 1.The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 【 】 2.Click the up and down button to move the cursor to SYSTEM SETTING , EXIT and click the right button to enter into the next menu. -
Page 22: Camera Setting
Camera setting 5. Camera setting MAIN MENU 5. 1 Zoom speed SYSTEM SETTING CAMERA SETTING 、 The system enters into the main menu by calling 95 preset or by calling 9 FUNCTION SETTING preset twice within 3 seconds. WINDOW BLANKING EXIT 、... -
Page 23: Digital Zoom Control 2
Camera setting 5. 2 Digital zoom control MAIN MENU 、 The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 、 【 】... -
Page 24: Back Light Compensation
Camera Setting 5. 3 Back light compensation MAIN MENU 、 The system enters into the main menu by calling 95 preset or by calling 9 SYSTEM SETTING preset twice within 3 seconds. CAMERA SETTING FUNCTION SETTING 、 【 】 Operate joystick, move the cursor to CAMERA SETTING to enter WINDOW BLANKING... -
Page 25: Slow Shutter Control
Camera setting 5. 4 Slow shutter control MAIN MENU 、 The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 、 【 】... -
Page 26: Wdr Control
Camera Setting 5. 5 WDR Control MAIN MENU SYSTEM SETTING 1. The system enters into the main menu by calling 95 preset or by calling CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 【 】 2. Operate joystick and move the cursor to CAMERA SETTING , press EXIT 【... -
Page 27: Advance Setting
Camera setting 5. 7 Advance setting MAIN MENU SYSTEM SETTING 1. The system enters into the main menu by calling 95 preset or by calling CAMERA SETTING 9 preset twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 【 】 2. Operate joystick and move the cursor to CAMERA SETTING , EXIT 【... -
Page 28: Ae Mode
Camera Setting 5. . 7 2 AE mode CAMERA SETTING 、 【 】 【 】 Operate joystick, move the cursor to EXPOSURE , press OPEN , tilt up/down joystick to choose AE mode, modes for choosing as follow: ZOOM SPEED HIGH ●... -
Page 29: Image Setting Function
Camera setting 5. 7. 4 Image Setting Function CAMERA SETTING 【 】 1. Operate the joystick to move the cursor to PICTURE , move joystick ZOOM SPEED HIGH 【 】 rightward or press OPEN to enter the submenu; DIGITAL ZOOM BLC MODE 【... -
Page 30: Function Setting
Function setting 6. Function setting 6. 1 Preset MAIN MENU . The system enters into the main menu by calling 95 preset or by calling SYSTEM SETTING “ ” 9 preset twice within 3 seconds. Click each command to enter preset menu CAMERA SETTING according to the order of the left picture. -
Page 31: Scan
Function setting 6. 2 Scan MAIN MENU Scan is that preset two points , then the camera repeatedly scan betw- SYSTEM SETTING een the two points at a stable speed, the same magnification and pan. A do- CAMERA SETTING me has four scan tour. FUNCTION SETTING 、... -
Page 32: Pattern
Function setting 6. 3 Pattern MAIN MENU Pattern is built-in function in camera; the PTZ can record tracks while SYSTEM SETTING less than 180s. (A series of pan/tilt controlling and lens controlling command). CAMERA SETTING A PTZ may set up to 4 pattern tours. FUNCTION SETTING 1. -
Page 33: Tour
Function setting 6. 4 Tour MAIN MENU Tour is the built-in function in the PTZ, it will arrange the presets SYSTEM SETTING into the queue of auto-tour, and can set how long it will park at preset. CAMERA SETTING FUNCTION SETTING Operate auto-tour is a process of incessantly transfer each preset. -
Page 34: Zone
Function setting 6. 5 Zone MAIN MENU A PTZ may be set up to 8 zones; the regional scene can't be overlapped. SYSTEM SETTING 【 】 User can set label for each zone. When setting ZONE LABEL as ON, CAMERA SETTING the PTZ will display zone label as it runs some zone. -
Page 35: Time Running
Function setting 6 . 6 Time running MAIN MENU User can set the time of preset, scan, tour and pattern. SYSTEM SETTING CAMERA SETTING 1.Call 95 preset or call 9 preset twice within 3 seconds to enter into the main FUNCTION SETTING menu. -
Page 36: Privacy Zone Masking
Privacy zone masking 7. Privacy zone masking MAIN MENU Privacy function can show someone piece of regional shielding while SYSTEM SETTING protecting. For example, protect the window of bedroom or ATM of bank. A CAMERA SETTING PTZ can set up to 24 privacy windows.(Masking setting function is relat- FUNCTION SETTING ive with the model of camera module. -
Page 37: Appendix
Appendix 8 Appendix 8. 1 Menu Index MAIN MENU SYSTEM SETTING CAMERA SETTING FUNCTION SETTING WINDOW BLANKING EXIT SYSTEM SETTING FUNCTION SETTING WINDOW BLANKING CAMERA SETTING EDIT DOME LABEL ZOOM SPEED HIGH PRESETS DIGITAL ZOOM WINDOW NUMBER INITIAL INFO SCAN BLC MODE DISPLAY SETUP EDIT WINDOW... -
Page 38: Rs485 Bus Basic Knowledge
Appendix 8. 2 RS485 Bus Basic Knowledge Ø Characteristics of RS485 Bus As specified by RS485 standard, Rs485 Bus is of half -duplexed data transmission cables with characteristic Ω impedance as 120 . The maximum load capacity is 32 120Ω 120Ω... - Page 39 Appendix Ø Problems in practical connections In some circumstances user adopts a star co- In such circumstances the factory recommends nfiguration in practical connection. The termina- the usage of RS485 distributor. The distributor can tion resistors must be connected to the two equi- change the star configuration connection to the mode pment 1# and 5# in Picture 8.2-3.
-
Page 40: Installation Instruction
Warnings 9. Installation 9. 1 Caution 9. 3 Water Proof Outdoor PTZ has well waterproof , moisture-proof, Please refer to user manual before installation. dust proof performance, has achieved the Ip66 intern- ： C Power D 1 , for actual needs, please refer to ational standard. -
Page 41: Structure Introduction
Warnings Ø Stuff Preparation Ø Set switches Please select the type of cables based on transmitting distance: There is seperated switches structure on the base " " board of vehicle PTZ. Pls check the switches setting ● Minimum video coaxial cable requirements: in the manual appendix to set PTZ baud rate, protocol Ω... -
Page 42: Basic Size Graph
Installation Introduction 9. 6 Basic Size graph Ф 173 Ф 197.6 Picture 9.6-1 9. 7 Installation 9.7. 1 Drill installation hole As picture 9.7.1-1, according to the size of the base board, drill holes on the top board of the vehicle. Pls pay attention to the direction. -
Page 43: Switches Setting
Installation Introduction 9. 7. 2 Installation between PTZ and top board Before lock the bolt, pls make sure the PTZ baud rate, protocol and ID address had been set. As picture 9.7.2-1, use M6 bolt to lock PTZ onto the top board of vehicle. Top base board Front of the vehicle M6*25boit (4pcs) -
Page 44: Electrification Inspection
Installation Introduction 9. 9 Electrification inspection Connect video cable and control cable to the other equipments; Electrify DC12V power. The PTZ carries on self-testing and executes replacement procedure after power-on. In the process of self-checking, camera will rotate horizontally and slowly for one and half cycle to the default original horizontal point which is set by factory, then upwardly turn to original vertical point, then downwardly to original horizontal point. -
Page 45: Maintance Service Terms
Maintenance 10. Maintenance service terms 1. Range of warranty The product will be maintained free for one year. ● The product will be obtained the free maintenance service if the same malfunction appears again within three ● months. Malfunction of products caused by force majeure (such as war, earthquake, lightning strike and so on ), abuse, ●...
Need help?
Do you have a question about the KVD 20 Color and is the answer not in the manual?
Questions and answers