Table of Contents
Advertisement
Mode name
Demonstration
Ejection of the disc is prohibited.
lock/unlock
The lock setting is effective until unlocking the
tray
initialization of service mode.
Progressive initialization The progressive setting is initialized to Inter-
lace.
Default setting
The date of Menu, Mode and EEPROM
setting, etc. is set to the default condition in
factory.
Item
Description
and
not
released
by
Main
FL display
*When lock the tray.
unit
"LOCK" is displayed for 3 seconds.
*When unlock the tray.
UNLOCK is displayed for 3 sec-
onds.
*When press [OPEN/CLOSE] key
while the tray being locked.
Display LOCK for 3 seconds.
The
display
before
leaves.
"HELLO" is displayed 10 seconds.
12
Key operation
Front Key
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
Note:
When a disc is not in tray, this
setting is not effective.
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
execution
When the power is on (SS mode),
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
While the unit is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
Repeatedly press
remote control or [POWER] on the
unit until "08 FIN" is displayed on
the unit's display.
Press and hold [OK] on the
remote control or [OPEN/CLOSE]
on the unit for at least 3 seconds.
[
]
on the
Advertisement
Table of Contents
