Child Restraint Systems With A Top Tether Strap - Toyota COROLLA iM 2017 Service Manual

62
1-1. For safe use

Child restraint systems with a top tether strap

1
Adjust the head restraint to the uppermost position. (→P. 98)
If your child restraint system interferes with a head restraint and cannot be
installed properly, install the child restraint system after removing the head
restraint. (→P. 99)
2
Secure the child restraint sys-
tem using the seat belt or
LATCH anchors.
3
Remove the luggage cover. (→P. 213)
4
Latch the hook onto the anchor
bracket and tighten the top
tether strap.
Run the top tether strap under the
head restraint.
Make sure the top tether strap is
securely latched.
5
Outboard rear seats only: Adjust the head restraint to the lowest
position. (→P. 98)
If your child restraint system interferes with a head restraint and cannot be
installed properly, remove the head restraint. (→P. 99)
COROLLA iM_U (OM12K64U)