Philips AZ1080 User Manual page 9

AZ1080/01 03/07/02 11:31
4 Close the cassette door.
5 Press RECORD 0 to start recording.
• Playing of the CD starts automatically. It is
not necessary to start the CD player
separately.
6 For brief interruptions press PAUSE ;.To
resume recording, press PAUSE ; again.
7 To stop recording, press STOP•OPEN 9/.
The CD player goes to pause mode.
Press PLAY•PAUSE 2; to resume CD
playback, or press STOP 9 to stop CD
play.
Selecting and recording a particular
passage
• During CD playback, press and hold down
the SEARCH buttons ∞ or § on the set
to find your passage.
• Press PLAY•PAUSE 2; to put the CD
player on pause at the selected passage.
Recording will begin from this exact
point in the track when you press
RECORD 0.
Note: If you press RECORD 0 during
playback, recording starts automatically from
the beginning of the current track.
Page 11
Recording from the Radio
1 Adjust the source selector to MW or FM to
select your desired waveband.
2 Tune to the desired radio station (see
Radio reception).
3 Press STOP•OPEN 9/ to open the
cassette door. Insert a blank tape.
4 Close the cassette door.
5 Press RECORD 0 to start recording.
6 For brief interruptions, press PAUSE ;.To
resume recording, press PAUSE ; again.
7 To stop recording,
press STOP•OPEN 9/ .
Recording
11