Selecting A Different Track - Philips AZ1080 User Manual

AZ1080/01 03/07/02 11:31

Selecting a different track

During playback you can use the
SEARCH buttons to select a particular
track.
• If you have selected a track number in the
stop or pause position, press
PLAY•PAUSE 2; to start playback.
• Press SEARCH § once briefly for the
next track, or press repeatedly until the
desired track number appears in the display.
• Press SEARCH ∞ once briefly to return
to the beginning of a current track.
• Press SEARCH ∞ more than once briefly
for a previous track.
Finding a passage within a track
1 During playback, press and hold down
SEARCH ∞ or §.
• The CD is played at high speed and low
volume.
2 When you recognize the passage you want
release the SEARCH button.
Normal playback resumes.
Note:When searching within a final track and
you reach the end of the last track, the CD
goes to stop mode.
Page 9
Repeat play modes
REPEAT can be selected or changed
during playback in the following sequence:
REPEAT – plays the current track
continuously
REPEAT ALL – plays the entire CD
continuously
IC BA SS
D B B
1 During playback, press REPEAT once or
more until the desired REPEAT mode is
shown.
• You can use SEARCH ∞ or § to skip
tracks during the repeat modes.
• The REPEAT play options can be
combined and used with shuffle: e.g.
REPEAT ALL
entire CD in random order.
2 To return to normal playback press
REPEAT until the REPEAT modes are no
longer shown.
• You can also press STOP 9 to quit the
play mode.
3 During playback, press SHUFFLE once.
• All tracks are played in random order.
CD-Player
IC BA SS
D B B
– repeats the
SHUFFLE
9