Towing The Vehicle - Cadillac CTS Owner's Manual

Hide thumbs Also See for CTS:
Table of Contents

Advertisement

Warning
Fans or other moving engine parts
can injure you badly. Keep your
hands away from moving parts
once the engine is running.
5. Connect one end of the red
positive (+) cable to the remote
positive (+) terminal on the
discharged battery.
6. Connect the other end of the red
positive (+) cable to the
positive (+) terminal of the good
battery.
7. Connect one end of the black
negative ( ) cable to the negative
( ) terminal of the good battery.
8. Connect the other end of the
black negative ( ) cable to the
remote negative ( ) grounding
terminal for the discharged
battery.
9. Start the engine in the vehicle
with the good battery and run
the engine at idle speed for at
least four minutes.
10. Try to start the vehicle that had
the dead battery. If it will not
start after a few tries, it probably
needs service.
Caution
If the jump leads are connected or
removed in the wrong order,
electrical shorting may occur and
damage the vehicle. The repairs
would not be covered by the vehicle
warranty. Always connect and
remove the jump leads in the
correct order, making sure that the
cables do not touch each other or
other metal.
Jump Lead Removal
Reverse the sequence exactly when
removing the jump leads.
After starting the disabled vehicle and
removing the jump leads, allow it to
idle for several minutes.
VEHICLE CARE

Towing the Vehicle

Caution
Incorrectly towing a disabled
vehicle may cause damage. The
damage would not be covered by
the vehicle warranty.
Do not lash or hook to suspension
components. Use the proper straps
around the tyres to secure the
vehicle.
Have the vehicle towed on a flatbed
car carrier. A wheel lift tow truck
could damage the vehicle.
305

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats 2017Ats-v 20172011 cts-v sports sedan

Table of Contents