Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Monitor Audio CW8
Summary of Contents for Monitor Audio CW8
- Page 1 O w n e r s M a n u a l...
-
Page 2: Table Of Contents
10 Introduction Thank you for your purchase of the CW8 or CW10, which have been designed and constructed using quality systems and materials to provide years of enjoyment, reliability and pride of ownership. The subwoofers both use our own, proprietary in-house developed DSP and EQ profiles to provide you with the all encompassing Monitor Audio experience. -
Page 3: AmpPanel
This is provided to update the firmware and settings of the subwoofer in conjunction with the SubConnect application. The application must be downloaded from the Monitor Audio website. A USB cable is not included, please use the appropriate USB A - USB B cable. -
Page 4: Phase Control
Mains Voltage Selector Factory preset to suit the voltage of the country of origin. This should not be adjusted. Mains Power Switch Mains ‘rocker switch’ providing overall power off and on/ auto. In the on/auto mode, the unit will turn on when an input signal is sensed or RS232 command and will turn off after 20 minutes (default setting) when the signal is removed (source turned off). -
Page 5: Positioning/InitialSetUp
Positioning/InitialSetUp Leave the subwoofer unplugged from the mains until the installation procedure is completed. The subwoofer should be sited in the most suitable position, preferably not directly in the corner of a room as this may cause excessive bass boom. The optimum position is next to either of the front left or right speakers. Once a desirable position is achieved it is important to check if the cables are long enough to reach comfortably without being under tension. -
Page 6: Rs232
RS232 CommandList The subwoofer can be controlled via the RS232 port on the The following SET commands control the operation of the amplifier panel. The subwoofer can be controlled by sending a Subwoofer string of characters to the RS232 connector. Command Description Reply from Subwoofer... -
Page 7: EqProfiles
To update the firmware on the Custom Subwoofer, you will need the SubConnect application. This is downloadable from the Monitor Audio Website. Please follow the installation and setup instructions with the application. Once the SubConnect app has loaded and established... -
Page 8: AutomaticUpdate
AutomaticUpdate. ManualUpdate To carry out the update, click on OK. You will then see If the automatic update doesn’t work, or you wish to manually another pop up showing the product, version number and check for an update, open the app and with the Subwoofer on a brief summary of the changes. -
Page 9: FactoryReset
If there is no signal, the subwoofer will need to the Important Safety Instructions booklet), provided that the be woken up by pressing the Preset button. product was supplied by an authorised Monitor Audio retailer under the consumer sale agreement. To verify your manufacturer’s warranty, please visit the online registration form at: www.monitoraudio.com... -
Page 10: Specifications
5 - 12v via 3.5mm mono mini-jack socket Standby: < 0.5W (ErP approved) Power Consumption Typical Idle: < 10W Max Rated: 400W 9.52Kg 12.64Kg Weight (unpacked) 21lb 27lb 12oz Monitor Audio reserves the right to alter specifications without notice. monitoraudio.com... -
Page 11: TroubleShooting
Is the unit receiving a signal (12v trigger not being used)? Is the signal source turned on and playing something? Try adjusting the volume level of the source. If it still does not turn on/ power up, please contact your local dealer/ distributor or Monitor Audio immediately. No sound from subwoofer. - Page 12 Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Email: info@monitoraudio.co.uk Web: www.monitoraudio.com Designed & Engineered in the United Kingdom Made In China Version 2. 2016 monitoraudio.com...