Wiring Schematic Diagram - Panasonic VL-SV71 Installation Manual

Wiring schematic diagram

Set up correctly according to the following wiring schematic diagram and "Wire type and length".
R For information, such as order numbers, about optional devices that can be connected to, refer to the
"Additional/replacement accessories" section in the Operating Instructions.
MAIN MONITOR
1 D1
2 D2
3 D3
4 D4
5 Ml-1
6 Ml-2
7 MO-1
8 MO-2
9 MO-3
10 MO-4
11 MO-5
12 MO-6
13 IN1
14 IN2
15 IN3
16 IN4
17 P1
18 P2
19 S1
20 S2
21 S3
22 S4
24 V DC
POWER SUPPLY UNIT
A Power supply
*1 When you use an additional doorphone, the maximum number of the electric locks that can be
connected to the doorphone depends on the type of doorphone. Consult your dealer for further
information.
For VL-V554 users:
– Make sure to only connect electric door locks to the S1/S2 terminals of the doorphones.
*2 Connection devices for option input (A contact) can be used when a VL-V900 and VL-V700 series
Video Intercom System for Apartment Complexes is used.
– Make sure to connect emergency terminals to the IN1/IN2 terminals.
– Make sure to connect doorbells to the IN3/IN4 terminals. A doorbell and doorphone 2 cannot be
used together.
*3 VL-SV72/VL-MV72 only
DOORPHONE 1
NP
NP
NP
NP
1
NP
Electric
lock
*3
*1
DOORPHONE 2
NP
NP
NP
NP
NP
NP
1
Electric
lock
*1
You can also connect an
optional lobby station or Video
Intercom System for Apartment
Complexes. (See page 7.)
EXTENSION
5 Ml-1
6 Ml-2 MONITOR 1
EXTENSION
5 Ml-1
6 Ml-2
MONITOR 2
EXTENSION
5 Ml-1
MONITOR 3
6 Ml-2
Connection device
for option Input
(A contact) *2
Terminal box
(4-conductor
wiring)
PBX
NP: Non-polarised
5