Ink Heating; Maintenance - Durst Omega 2 Operating Instructions Manual

F Software
Calling up print head temperature
Calling up print head heating
58 / 91

4.3 Ink heating

You can call up the print head temperature and print head heating on the
Ink Heater tab.
Fig. 40 Ink Heater tab
When the respective button is clicked, the current temperature for each color
and print head is displayed. The top line shows the values for the first print
head row, and the bottom line shows the values for the second print head
row. The individual values X / X correspond to the individual print heads in
the sequence 1 to 2.
The value is not updated automatically. It must be updated again by clicking
the button as needed.
When clicking the respective button, the current status of the print head
heating for each color and print head is displayed. The individual positions
XXXX (positions 3 and 4 are not occupied with this printer) correspond to the
individual print heads in the sequence 1 to 2. The values have the following
meaning:
 0: Temperature OK
C: Temperature too low

 H: Temperature too high (sets itself to 0 after a few minutes)
 All other values: Dust customer service must be notified

4.4 Maintenance

The Maintenance tab provides an overview of all service activities described
in the "Service" part (→ Page 68 / Service).
2004 – 2014 © Durst Phototechnik AG – www.durst-online.com, Omega 2, Issued 07/2014
Omega 2