Setting Suction Area; Procedure; Changing Media - Durst Omega 2 Operating Instructions Manual

E Operation
Fig. 14 Sign: Positions of the pull levers for suction areas
34 / 91

5 Setting suction area

5.1 Procedure

Fig. 13 Setting suction area
Set the suction area in the cleaning access point with the pull levers (2).
The positions based on the media width can be found on the sign (1)
on the inside of the door.

6 Changing media

Before a media change is performed, the unloading process must be
carried out in the software to switch off the suction.
2004 – 2014 © Durst Phototechnik AG – www.durst-online.com, Omega 2, Issued 07/2014
1
2
Omega 2